More from Fusable
Media Brands
For owner-operators
For trucking professionals
For contractors
For dealers and distributors
Data Solutions
Identifying active trucking fleets
Construction market intelligence
Ag equipment valuation data
Heavy equipment data & analytics
Motor carrier risk assessment
Specs, VIN decoding and values
Precision targeting at scale
Learn more about Fusable
Construction Equipment
Ag Equipment
Roadbuilding
Dealers
Business
Technology
Machine control: Page 6
Business
Machine Matters
Leveling the Great Grader Debate Joysticks, yes or no? Steering wheel, yes or no? Whatever the preference, equipment manufacturers are serving the market, says Georgia-based contractor By Mike Anderson On an August morning just west of Chicago, a motor grader was driven across an auction ramp, digging up a few bids along the way. Big […]
September 4, 2011
Safety
SITECH Southern Cone established to serve Argentina, Bolivia, Chile and Uruguay
A SITECH Technology Dealer has been established to serve Argentina, Bolivia, Chile and Uruguay, Trimble announced on May 23.
May 24, 2011
Sponsor Content
Cut Cycle Times and Fuel Costs With These Operator Habits
Volvo Construction Equipment
September 22, 2026
Business
CONEXPO/CONAGG 2011
CONEXPO-CON/AGG What it means to you and the future of the industry Staff Reports With a backdrop of 20-percent construction unemployment and two years of abysmal machine sales, the tri-annual heavy equipment trade show CONEXPO-CON/AGG opened on March 22nd, in Las Vegas – ground zero in the housing bust and a town still reeling from […]
May 4, 2011
Machine control
Gradtek appointed Leica Geosystems machine control dealer for Quebec
Leica Geosystems established a new machine control dealer in Quebec. Gradtek, which sells, rents, and services precision products in the construction and agricultural markets, has been appointed a dealer of 2D and 3D machine control systems. Peter Hettstedt, general manager, Canada at Leica Geosystems stated, “We are very excited to be partnering with Gradtek to […]
April 25, 2011
Machine control
Sitech Technology creates dealer in Hawaii, California
A Sitech Technology dealer was established in Hawaii and southern California. The Sitech dealership network offers a comprehensive portfolio of construction technology systems to heavy and highway contractors. Sitech Technology dealers represent Trimble and Caterpillar machine control systems for the contractor’s entire fleet of heavy equipment, regardless of machine brand, along with Trimble’s portfolio of […]
April 5, 2011
ConExpo-Con/Agg
Komatsu fields diverse new machines
Komatsu brought to ConExpo a new machine or two in almost all its significant catagories, including the second iterration of its groundbreaking electric-hybrid excavator, and unveiled its strategy for Tier 4 engines. The HB215LC-1 hybrid electric 20 ton excavator uses up to 25 percent less fuel than comparable models (48 percent less in some scenarios) of […]
March 24, 2011
Business
Machine Matters
Fill out the team Pavers remain the cornerstone of a road contractor’s arsenal, but is another full-time member primed to join the equipment team? By Mike Anderson  If you’re a paving contractor, no doubt you’re used to having milling equipment working at your jobsites. The use of cold planers as part of the road […]
March 24, 2011
ConExpo-Con/Agg
Leica Geosystems launches ConExpo Website
Leica Geosystems has launched a website dedicated to helping construction industry professionals get the most out of their visit to ConExpo-Con/Agg 2011 this year. The Website may be found at www.conexpo2011-leica-geosystems.com.
March 14, 2011
ConExpo-Con/Agg
Leica Geosystems showcases machine control, positioning technology
Leica Geosytems will display their advances in machine control and construction positioning technology at ConExpo-Con/Agg 2011. These updates are set to revolutionize the construction industry by tackling jobsite productivity, accuracy and cost-related issues head-on. Leica Geosystems will exhibit new products to handle paving, grading and excavating challenges at their booth during ConExpo. Booth visitors will […]
March 14, 2011
Roadbuilding
Special Report
Backhoes By Tom Jackson, executive editor, Equipment World  Contractors extend trade-in times, rely on used equipment As with just about every other category of equipment, the sales of both new and used backhoes plunged between 2006 and 2010. What’s a little less obvious until you do the math is the ratio of new to […]
March 4, 2011
Safety
CONEXPO-CON/AGG 2011 (Supplement)
SHOW PREVIEW For new products, the latest technology and access to the best minds in the industry, CONEXPO-CON/AGG is the place to be this March. The show, held March 22 through 26 in Las Vegas, will host more than 2,000 exhibitors, include a comprehensive education program and launch new events, such as the International Mixer […]
March 3, 2011
Safety
Marketplace
FLEXIBLE FUNNEL Keep oils and fluids from dripping in even the tightest spots with the Form-A-Funnel draining tool from New Pig. The flexible tool bends to fit the space and then holds any shape, keeping fluids off of the shop floor and directing the flow into the drain. The Form-A-Funnel is constructed from moldable aluminum […]
March 2, 2011
Machine control
Topcon introduces 3D GPS systems for wheel loaders
LIVERMORE, Calif. – January 17, 2011 – Topcon Positioning Systems (TPS) introduces a new product to its 3D machine control lineup, a machine control package for wheel loaders. Tony Vanneman, TPS construction product marketing manager, said, “This new 3D-MC product combines Topcon’s dual mast GPS system with three TS-1 tilt sensors, the rugged, easy to […]
January 21, 2011
Machine control
Two new SITECH dealers established in Brazil
Two new SITECH Technology Dealers have been established in Brazil. SITECH Sul Brazil and SITECH Noroeste Brazil join the premier network of SITECH dealerships, a global distribution network offering a comprehensive portfolio of construction technology systems available to heavy and highway contractors.
January 14, 2011
Machine control
Indonesia opens SITECH Technology Dealer
Trimble has established a SITECH Technology Dealer in Indonesia.
January 4, 2011
Business
Attachments 2010 (Sponsored Information)
Compact trencher maintenance Simple steps to improve performance from your attachment Maintenance matters Skid steer trenching attachments are one of the tools that are commonly thrown into the “I’ll get to that later” pile because they have few moving components. But, a lack of regular maintenance and inspection will result in a significant lack of […]
December 6, 2010
Machine control
Technology
Tech tools Track, control, monitor and easily transfer information By Tom Jackson From pickups to dozers, telematics system tracks anything in your fleet If it’s a machine and it moves, you can track and manage it with the new Navman Wireless Qtanium 300 GPS tracking device. Designed to work with both on-highway trucks and off-road […]
November 9, 2010
Machine control
Topcon names regional sales manager
Topcon Positioning Systems named Mark Jones as construction sales manager for the Northeast region. Prior to joining TPS in 2004 as a machine control specialist for the technical support group, Jones worked for a Topcon distributor in Western Canada where he gained field experience working with private and government road building contractors. At TPS, Jones […]
October 18, 2010
Previous Page
Page 6 of 11
Next Page
Top Stories
Mini Excavators
John Deere 40 P-Tier Mini Excavator: An "Absolute Beast” for Small Jobs
At 9,190 pounds and 39 horsepower, the 40 P-Tier gets performance and cab upgrades and attachment features for high productivity.
Compact Wheel Loaders
New Holland Releases Its 2 Smallest Compact Wheel Loaders: W50D and W60D
The Dirt
Komatsu’s Next-Gen D175AX-10 Bulldozer Completely Redesigned
Manufacturer News
Komatsu to Acquire Astec’s Roadtec, Carlson Road Construction Business
Featured Sponsor
While you know how a DPF works, here’s what to know about plugging: its causes, signs, and solutions.
Equipment World Contractor of the Year
The Contractor of the Year contest recognizes contractors who have annual revenues of between $3 million and $20 million and exemplify the highest standards of construction professionals.
White Papers
Choosing The Right Tire and Track Patterns for Maximum Productivity