Construction Equipment
Ag Equipment
Roadbuilding
Dealers
Business
Technology
Maintenance: Page 7
Maintenance
Act now to avoid these lube, coolant and grease mistakes
It’s always a good idea to follow best practices in any maintenance program. But what about avoiding worst practices? Here are some common mistakes construction equipment fleet managers make regarding lubes, coolants and greases.  Coolants Coolants can be the most commonly mishandled part of a fluid management program, since experts say they are the […]
June 5, 2020
Maintenance
When it comes to equipment fluid management, little mistakes can add up to big problems
Dig deeper into fluid management for your construction equipment with these best practices – and tips on how to avoid the worst ones.
May 14, 2020
Sponsor Content
Stop Wasting Time on Grade Checks
Hemisphere GNSS
Manual grade checks cost time and money. Learn how 2D machine control can improve accuracy, reduce rework, and keep your projects on schedule. Download the free white paper now.
November 1, 2025
ConExpo-Con/Agg
Thunder Creek Equipment expands size, versatility, options on new multi-tank equipment fluid handling trailers, truck bodies
Thunder Creek Equipment, which makes bulk diesel and diesel exhaust fluid handling and storage equipment, revealed two new fluid trailers and a new truck body at ConExpo 2020. The new units are designed to handle not just DEF but oil, fuel and other fluids. You can check out all the details on the new MTO, […]
April 3, 2020
Business
How to super-clean and disinfect construction equipment cabs against coronavirus
When the health and safety of your crew are on the line, apply these tips from automotive detailer Darren Priest to keep construction equipment clean.
April 1, 2020
Maintenance
Cease work and turn off the engine when you see these red flags on an oil analysis report
Oil analysis can show you trends in the health of your engines and oil. It can also tip you off to eminent catastrophic failure. If you catch these problems early enough, you can fix the underlying problem, drain and refill the crankcase with new oil, and monitor the results with further oil analysis, saving thousands […]
March 19, 2020
Oils & lubricants
New lube oil standards will give gas engine trucks better protection and fuel efficiency
Starting in May of this year there are some new lube oil standards coming down the turnpike for spark-ignited gasoline engines. The new oils are said to offer greater engine protection and fuel efficiency for today’s cars and trucks. Two of the new standards, ILSAC GF-6A and GF-6B, are the latest in a line of […]
February 26, 2020
Components
BKT at ConExpo 2020: EM 936 Super tire for excavators, telehandlers
BKT’s EM 936 Super, to be shown in the company’s Central Hall booth C22705 at ConExpo 2020, has been specifically designed for excavators and telehandlers in digging and loading operations as well as transport applications. With an 8 to 10 percent increase in tread width, the tire is designed for stability and riding comfort. It also […]
February 14, 2020
Maintenance
Survey: 87% of automotive technicians actively use a cell phone for work in the bay
An automotive market research firm has released a survey on technician cell phone use that should also interest the employers of construction equipment technicians. IMR says its latest survey on cell phone use in bays at independent repair shops shows that 99.6 percent of automotive repair technicians own a cell phone, with 46.4 percent also own […]
January 23, 2020
Maintenance
Winter’s here. It’s time to check dozer undercarriage wear
When the rest of the world is basking in the glow of the holiday season, smart equipment managers think about the condition of their dozers’ undercarriages. Whether it’s simply turning the pins and bushings or replacing worn or damaged parts, the slower work pace makes winter the best time to tune up. Half of a […]
January 2, 2020
Oils & lubricants
Chevron’s new heavy-duty engine oil reduces DPF clogging by 60%, is 15 years in the making
Chevron has announced the release of a new heavy-duty engine oil, a fluid which the company says extends the life of the engine’s Diesel Particulate Filter (DPF) and caps a development process that has spanned more than 15 years. Current heavy-duty engine oils are formulated up to the API CK-4 limit of 1% sulfated ash, […]
November 8, 2019
Components
Continental Tire unveils Generation 3 construction tire and matching retreads, reintroduces General Tire lines
Continental's Generation 3 tires can be applied to construction, cement, utility, forestry, logging and emergency vehicles and can be retreaded up to 3 times.
October 9, 2019
Maintenance
27 ways to attract and retain equipment technician talent (Part 3 in series)
Editor’s Note: This is Part Three of a four-part series on the challenges brought on by the shortage of diesel technicians in the U.S. You can read Part One of the series by clicking here. Read Part Two, here. Read Part Three, here. Read Part Four, here. “We’ll try anything.” When it comes to technician […]
September 10, 2019
Maintenance
Heavy Equipment Tire Maintenance: A little time can produce big savings
Unless you do the math, you may not realize that after labor and fuel, tires are your third-highest operating cost on a wheeled piece of heavy equipment. So starting a simple maintenance and management program could save you substantial amounts of money. Creating a tire maintenance and management program may seem like an administrative burden […]
September 10, 2019
How to do Everything Better
How to calculate your DEF use
Running out of diesel exhaust fluid is about as dumb as running out of diesel fuel. Engine manufacturers set DEF burn rates at about 2 to 5 percent of fuel burned. (For every 100 gallons of diesel a machine consumes, it will burn 2 to 5 gallons of DEF.) So multiply the fuel consumption of […]
July 29, 2019
How to do Everything Better
How to adjust the tension on your tracks
Almost all tracks are tensioned by pumping grease into a piston. The grease fitting is typically located behind a cover plate in the center of the undercarriage. This extends the piston and stretches the tracks. (You let grease out of the fitting to reduce tension on the tracks.) Your owner’s manual will give you specs […]
July 29, 2019
How to do Everything Better
How to repair a grease zerk
When a grease zerk won’t accept grease from your grease gun, the simplest solution is to unscrew the zerk, clean it out with a wire, brake cleaner or compressed air, reinstall the zerk and try it again. If it still won’t work, you have bigger problems and may need to call in a mechanic. As […]
July 29, 2019
How to do Everything Better
How to get a good oil sample on construction equipment
According to Dan Arcy, global OEM technical manager for Shell Lubricants, an engine oil analysis program requires users to follow a few fundamental procedures that often don’t get the attention they deserve. Some tips: • Provide a proper oil sample to the lab. If you take your sample when the oil is being drained, catch […]
July 29, 2019
How to do Everything Better
How to calculate construction owning and operating costs
Owning costs = purchase price of machine + financing + taxes – disposal price (what you get for that machine when you resell it). Operating costs = labor + fuel + maintenance + replacement costs of tires, tracks and other components + overhead. Add the owning to the operating costs and you have your O&O […]
July 29, 2019
Previous Page
Page 7 of 75
Next Page
Top Stories
Compact Utility Loaders
Toro Launches Redesigned Dingo TX450, TX550 Compact Utility Loaders
The only walk-behind loaders in their class, the Dingo TX 450 and TX 550 get modern styling yet keep the intuitive operation and performance specs.
Compact Track Loaders
Sneak Peek: Kubota’s Upcoming Largest Compact Track Loader, the SVL110-3
Wheel Loaders
Closer Look: Develon’s Top-Selling DL280-7 Wheel Loader with Transparent Bucket
Heavy equipment
2025 - 2026 Heavy Construction Equipment Guide
Market Pulse
Quick Data: Top-Selling Motor Graders of 2024 - 2025
Equipment World Contractor of the Year
The Contractor of the Year contest recognizes contractors who have annual revenues of between $3 million and $20 million and exemplify the highest standards of construction professionals.
White Papers
Sponsored by Shell Lubricants
Managing the Farm Through a Tough Market
Our report on Managing the Farm through a Tough Market breaks down smart strategies from farm management experts.
