TheRoadtec SB-2500D Shuttle Buggy® material transfer vehicle

The SB-2500D Shuttle Buggy® material transfer vehicle can store hot mix asphalt and transfer it from a truck to a paver for continuous paving. A patented antisegregation auger remixes materials just before they are delivered to the asphalt paver. The 25-ton (22.7 MT) surge capacity of the SB-2500D allows trucks to unload material immediately and return to the asphalt plant. Options include a windrow pickup head and road widener attachment.

 

SB-2500D SPECIFICATIONS

ENGINE:

CAT ® C9-300 HP, Tier llI, 6-cylinder diesel engine, 300 HP (224 kw) @ 2,200 rpm. Engine instrumentation includes

tach/hour meter, oil pressure, voltage and emergency shutdown system. Easy access to oil cooler/radiator.

OPERATOR™S STATION:

Operator positions on both sides. Control panel pivots for use from either station allowing for same-lane or adjacent-lane operation from either side. One-piece hydraulically-raisable hood allows easy access to engine, pumps and motors. Inside turning radius 26™6″ (8.1 m).

GROUND DRIVE:

All hydrostatic for continuously variable speed control with two speed ranges. Electric-over-hydraulic shift between working and transport ranges. Maximum speed (working range) 3.0 mph (4.8 kph). Maximum speed (travel range) 9 mph (14.5 kph).

TIRES:

Large, high-flotation – 21:00 x 25″ (53.3 m x 635 mm).

ELECTRICAL SYSTEM:

Standard system includes heavy-duty alternator, battery, and circuit breaker protection of all systems.

FUME EXTRACTION SYSTEM:

Two blowers. Fold-down 10″ (254 mm) exhaust pipes.

SLAT CONVEYORS TRUCK UNLOADING (C-1):

High-capacity truck unloading system with low deck height, 9™2″ (2.8 m) truck opening and 22″ (559 mm) o.d. x 8″ (203 mm) deep, 27% chrome-iron cast, segmented converging auger for quick material flow. Conveyor has weld-on flights 5/8″ (16 mm) thick, 5.5″ (140 mm) wide x 57″ (1,448 mm) long. Ni-Hard liner plates are removable. Power dump front hopper has a vibrator on the bottom that helps keep material moving. Adjustable push roller is standard. Conveyor capacity is rated at 1,000 TPH (907 MTPH).

SURGE BIN (C-2):

Unloads the surge bin with a multi-pitch 22″ (559 mm) o.d. x 8″ (203 mm) deep, 27% chrome-iron cast, segmented anti-segregation auger in the hopper. Conveyor system has weld-on flights 5/8″ (16 mm) thick, 7″ (178 mm) wide x dual 16″ (406 mm) long. Liner plates are Ni-Hard and removable. Conveyor capacity is 600 TPH (544 MTPH).

PAVER LOADING (C-3):

Conveyor swings 55 degrees to either side of center. Maximum conveyor discharge height is 12″ 6″ (3.8 m) from ground level. Conveyor flights welded to the chain are 1/2″ (12.7 mm) thick, 3″ (76.2 mm) wide and 30″ (762 mm) long. Conveyor has bolted 1/2″ (12.7 mm) 500 Brinell replaceable floor plates. C-2 and C-3 conveyors have on/off controls that are interlocked. Conveyor capacity is 600 TPH (544 MTPH).

HOPPER INSERT:

A mass-flow paver hopper insert is used to increase the hopper capacity of a conventional paver when used with the SB-2500D.

CAPACITIES:

Fuel tank…………………………………….140 gal (529 L)

Hopper……………………………………25 tons (22.7 MT)

material………………..120 lbs/cu ft (1,922 kg/cu m)

WEIGHTS:

Shipping weight………………74,500+ lbs (33,790 kg)

OPTIONS:

Release agent spray down system
Hydraulic generator set
Windrow attachment
Light Kits
Truck Hitch

 

Get the business tips, industry insights and trending news every contractor needs to know in the newsletter.
Top Stories