Tough Fibers for Concrete

Engineered, proprietary polymer modified pothole patching mixes permit permanent patches under winter working conditions. (Photo courtesy of EZ Street Inc.)Engineered, proprietary polymer modified pothole patching mixes permit permanent patches under winter working conditions. (Photo courtesy of EZ Street Inc.)

In earlier days, concrete pavements would employ steel wire mesh near the top of the layer to forestall inevitable hairline shrinkage cracks. While shrinkage cracks don’t compromise the load-carrying ability of a pavement, they are unsightly, especially when the wire mesh begins to rust, and rust streaks stain the surface.

A new generation of synthetic fibers is moving the industry beyond wire mesh. At booth No. 65010 in the Technology & Construction Solutions pavilion in South Hall 2, Euclid Chemical Co. will market its Tuf-Strand SF macrofibers as a crack alleviating material for concrete pavements and whitetoppings.

These patented polypropylene/polyethylene synthetic fibers create a three-dimensional reinforcement that mitigates concrete cracking while delivering reinforcement. The blend of fibers provide a reduction in both plastic and drying shrinkage cracking and hold together cracks that do form, according to the manufacturer.

They also don’t corrode like steel mesh, important as oxidized steel expands and greatly increases the potential for cracking in concrete. The fibers blend into the concrete mix, resulting in an even distribution and appearance in the poured slab.

Other fibers will be on display. Fibermesh 150, a microreinforcement system for concrete. It’s a 100-percent virgin homopolymer polypropylene multifilament fiber with a patented e3 technology from Propex Operating Co. USA, at booth No. 140 in the Las Vegas Hotel (formerly the Las Vegas Hilton).

Suited for overlays, Fibermesh 150 polypropylene microsynthetic fibers form a three-dimensional support network that resists the downward pull of gravity, thus keeping aggregates in suspension and promoting uniform bleeding. This network increases the tensile strain capacity of concrete during the plastic shrinkage phase as well.

Fibermesh observes that another advantage of polypropylene fibers is their ability to mitigate the explosive tendency of concrete during fires because they melt and relieve volatile steam pressure in concrete.

Partner Insights
Information to advance your business from industry suppliers
Selecting the Correct Construction Tire Solution
Presented by Michelin North America
8 Crucial Elements of a Tire Safety Program
Presented by Michelin North America
How High Fuel Prices hurt Your Business
Presented by EquipmentWatch

Editor’s note: This article is bonus coverage related to the February Road Science article in Better Roads magazine. Check out the February print edition of Better Roads to read more or read the web version here. To read the January 2014 edition of Road Science, which focused on the technologies behind the equipment at ConExpo-Con/Agg, click here for the digital magazine edition of “Expo Engineering.”