Volvo Construction Equipment is different. It™s designed, built and supported in a different way. That difference comes from an engineering heritage of over 175 years. A heritage of thinking first about the people who actually use the machines. About how to help them be safer, more comfortable and more productive. About the environment we all share. The result of that thinking is a growing range of machines and a global support network dedicated to helping you do more. People around the world are proud to use Volvo. And we”re proud of what makes Volvo different- More care. Built in.
The Volvo PF161 is a mid-sized, wheel-mounted paver / finisher utilizing Blaw-Knox technology, and is capable of placing bituminous base, binder and surface course mixes, cement- or lime-stabilized sub-based and graded aggregate.
Performance Features
– Low-pressure tires are exclusive to Volvo and provide a larger footprint for better flotation and traction
– Offset bogie front suspension is exclusive to Volvo, and distributes the weight of the front end more evenly for better traction
– Maintenance-free sealed auger and conveyor bearings eliminate daily greasing
– High-efficiency 406 mm (16″) augers are 19mm (0.75″) thick for better delivery and longer wear; patented poweradjustable height of 114mm – 279mm (4.5″ 11″) permits the operator to quickly adapt to varying job requirements and two control stations allow operators the convenience and control to work safely with the best visibility
– Single, swing-mounted operator console
– Pinned engine hoods and removable deck plates provide convenient access to vital components; filters are easily accessible.
– Automatic feed system control uses Mat Kontrol® II with a choice of paddle sensors of Ultra III® Sonic sensors
Available Options
¢ Additional operator™s umbrella
¢ Auger and auger guard extension kits
¢ Blaw-Kontrol® II
Mechanical grade sensor
Mobile reference systems
Ultra IV® Sonic averaging system
UltraEye® V Ultrasonic grade sensor
¢ Front wheel assist
¢ Hydraulic power tunnels and baffles (chain curtains)
¢ Material indicator kit
¢ Material management kit
¢ Truck hitch
Additional Features
– Hydrostatic direct traction drive eliminates approximately 70% of mechanical drivetrain components
– Easy access electrical circuit boards ensure that service procedures are faster and easier
– Central hydraulic valve block with interchangeable cartridge valves speeds service access and simplifies troubleshooting
– Unitized rear-feed section speeds service access to all major feeder system components by approximately 50%
– The most extensive selection of state-ofthe-art equipment options automate and improve the quality of your HMA paving operation.
Specifications
Model PF161
Machine Dimensions
Basic Screed Width m (ft) 2,44 (8)
Max Paving Width m (ft) 5,8 (19)
Paving Depth mm (in) 6,35 203,2 (0.25 8)
Hopper Capacity T (t) / m3 (cu ft) 8 (9.8) / 5,1 (181)
Gauge Width, Center To Center Of Drive Wheels mm (in) 1 994 (78.5)
Wheelbase mm (in) 1 905 (75)
Travel Height With Exhaust m (ft) 3,05 (10)
Width, Hopper Sides Up m (ft) 2,5 (8.21)
Width, Hopper Sides Down m (ft) 3,22 (10.42)
Length, Wedge-Lock Screed m (ft) 5,24 (17.2)
Length, OmniScreed IA m (ft) 5,39 (17.7)
Engine
Make / Model Cummins Elite 4BTA 3.9
Rated Power @ Installed Speed kW (hp) 80 (107)
Electrical System 12 volts, negative ground, 105 A alternator
Propulsion
Paving Speed m/min (fpm) 59,8 (196)
Travel Speed km/h (mph) 15,9 (9.9)
Rear Suspension (2) 14″ x 20″ low-pressure, sand rib, high-flotation, hydroflated tires
Front Suspension mm (in) (4) 305 x 559 (12 x 22) solid rubber-tired wheels
Weights
Tractor Only kg (lb) 9 230 (20,350)
With Wedge-Lock Screed kg (lb) 10 432 (23,000)
With OmniScreed IA kg (lb) 11 022 (24,300)
Miscellaneous
Cooling Capacity l (qt) 24,6 (26)
Fuel Capacity l (gal) 144 (38)
Hydraulic Reservoir Capacity l (gal) 189 (50)
Product improvement is a continuing goal at Volvo. Designs and specifications are subject to change without notice or obligation.
Screed Choices
-2,44 (8″) Wedge-Lock® screed has optional modular extensions to extend paving width up to 5.8m (19″); diesel-heated screed
– 2,44 m (8″) Wedge-Lock screed with 0.8m – 1.5m (2.5″) hydraulic extensions to extend paving width up to 4m (13″); optional modular extensions for the telescoping sections can increase maximum paving widths to 4,6 m (15″); diesel-heated; hydraulic extensions are not equipped with heat and vibration
– 2,44 m (8″) power extendible OmniScreed® IA with a fully screeded extebded paving width of 4m (13.13″); optional modular Wedge-Lock extensions can increase maximum paving widths to 5,2 m (17.17″); diesel-heated