Editor’s pick

Kubota’s KX121-3 Super Series compact excavator features a float angle blade or an optional 6-in-1 hydraulic blade to be angled 25 degrees and tilted 10 degrees for greater efficiency when leveling and backfilling. The 40.5-horsepower KX121-3 has a load-sensing hydraulic system that provides optimum oil flow to each cylinder.

Designed to improve your machine’s energy efficiency and extend oil maintenance intervals, Shell Lubricants’ Tellus EE synthetic hydraulic fluid can reduce hydraulic machinery’s energy consumption by an average of 8 percent. The fluid provides equipment protection with patented additive technology that has undergone extensive laboratory and field tests.

Ditch Witch’s RT10 and RT12 walk-behind trenchers feature fully hydrostatic steering for optimal handling, and offer a choice of high-flotation tires or heavy-duty, oscillating tracks. Operated by easy-to-use controls, the 11-net horsepower RT10 was designed for short runs. The RT12 features 16 net horsepower and an oil cooler to keep its Vanguard engine running in even the hottest conditions. Both units also offer a trail wheel for increased stability and reduced breakover when loading and unloading, or going over a curb.

E2 Systems’ portable concrete conveyor attaches to any front end wheel loader with 2.5-cubic-yard bucket capacity or larger. The conveyor places 300 cubic yards of concrete per hour, using dump trucks hauling 11 cubic yards per load.

Reznor’s Model RA-150 and RAD-150 150,000-BTU waste oil heaters for onsite recycling of used oils feature air atomizing burners, quiet on-board air compressors, positive displacement fuel metering pumps and automatic thermostat controlled operation. The Model RA-150 is a standard unit space heater, while the Model RAD-150 is a ductable furnace with a heavy-duty blower for moving heat to specific location.

Barber Turf Rakes leave soil aerated and graded, reducing labor costs and readying soil for overseeding or other site preparation requirements. Towed and powered by a tractor, the unit’s moldboard levels the ground, passing it over hundreds of tines raking through the graded soil.

Red Dot’s precleaner/filter/pressurizer with Gideon technology protects operators from harmful particulates and extend HVAC service intervals on machines with enclosed cabs. The unit draws debris-laden air into a precleaner and captures small particles using either a high-capacity filter for general protection, or a high-efficiency filter to capture 99.9 percent of particles down to 0.3 microns.

Made of lightweight woven polyester, Equipment Caps easily cover and protect skid-steer loader cabs, so you can avoid wet seats and foggy windows when arriving on the jobsite. The caps are secured by industrial strength bungee cords and grommets, and can be stored in an accompanying bag when not in use.