Case Construction Equipment continues the rollout of its G Series compact wheel loaders with the new 221G and 321G.
The models maintain similar performance specs as their F Series predecessors, with enhanced visibility, comfort and control, the company says.
The 221G has an operating weight of 12,547 pounds and a hinge pin height of 10 feet 9.5 inches, while the 321G comes in at 13,633 pounds with a hinge pin height of 11 feet 1.7 inches.
The loaders are designed for moving dirt, clearing snow and loading trucks on tight construction and landscaping jobsites.
Case upgraded the cabs based on the same design as the larger 421G, which debuted April 2025. The cab features:
- Adjustable cloth suspension seat
- Seat-mounted EH-control joystick with electronic speed shift control, a F/N/R switch and proportional loader control
- Heat and air conditioning
- New instrument buttons
- Customizable color display with encoder and integrated backup camera
- USB port and phone holder
- New righthand sliding window
- Right-side emergency exit
[2026 Tech & Spec Survey: A Deep Dive into Contractors’ Equipment Purchase Plans]
The 221G and 321G run on a 74-horsepower FPT diesel engine with no regeneration or DEF required. Both have a maximum travel speed of 25 mph.
Case says the loaders' advanced hydraulics deliver smooth, precise operation through flow sharing and load-sensing capabilities that adjust hydraulic flow for increased efficiency and fuel savings. Additional operator assistance features include Return to Dig, Auto Ride Control with speed settings and a Bucket Position Indicator.
The hydraulic skid-steer-compatible coupler fits a wide range of attachments, including buckets, forks, snowblowers.
Four corner strobes and a rotating beacon have been added for jobsite safety. Key service points have ground-level access. Hardware and a seven-year subscription to MyCaseConstruction Telematics are included.
To see all of the products and technologies unveiled at ConExpo 2026, check out our show coverage page here.
Case CE 221G Compact Wheel Loader Specs
- Engine: Tier 4 Final FPT F5H FL463 A
- Horsepower: 74 hp
- Operating Weight: 12,547 lb (Z-Bar)
- Standard Flow: 22.5 gpm
- Optional High Flow: 34.3 gpm
- Bucket Capacity: 1.2 - 1.56 cubic yards
- Hinge Pin Height: 129.5 in
- Dump Height – Fully Raised: 95.7 in
- Bucket Reach – Fully Raised: 37 in
- Tipping Load – Straight: 9,190 lb
- Tipping Load – 40 Degree Turn: 7,897 lb
- Lift Capacity – Full Height: 8,309 lb
- Lift Capacity – Maximum Reach: 10,593 lb
- Lift Capacity – Ground: 12,984 lb
*With a 1.2-cubic-yard GP Bucket with bolt-on edge. 1.56 cubic yard GP LM Bucket with bolt-on edge also available.
Case CE 321G Compact Wheel Loader Specs
- Engine: Tier 4 Final FPT F5H FL463 A
- Horsepower: 74 hp
- Operating Weight: 13,691 lb (Z-Bar Loader Arm) | 13,900 (XR Loader Arm)
- Standard Flow: 22.5 gpm
- Optional High Flow: 34.3 gpm
- Bucket Capacity: 1.3 – 1.7 cubic yards
- Hinge Pin Height: 133.7 in (Z-Bar) | 145.9 in (XR)
- Dump Height – Fully Raised: 99.3 in (Z-Bar) | 110.4 (XR)
- Bucket Reach – Fully Raised: 37 in (Z-Bar) | 46.3 in (XR)
- Tipping Load – Straight: 10,182 lb (Z-Bar) | 7,841 lb (XR)
- Tipping Load – 40 Degree Turn: 8,466 lb (Z-Bar) | 6,919 lb (XR)
- Lift Capacity – Full Height: 7,999 lb (Z-Bar) | 6,602 lb (XR)
- Lift Capacity – Maximum Reach: 9,964 lb (Z-Bar) | 8,356 lb (XR)
- Lift Capacity – Ground: 12,770 lb (Z-Bar) | 10,886 (XR)
*With a 1.3-cubic-yard GP bucket with bolt-on edge. 1.7-cubic-yard LM Bucket also available.
