Construction Equipment
Ag Equipment
Roadbuilding
Dealers
Business
Technology
Tag: bauma2016: Page 2
Construction Equipment
Rubble Master intros 120GO! tracked mobile impact crusher
At the Bauma show last week in Munich, Rubble Master took the wraps off its new flagship machine. The 120GO! tracked mobile impact crusher features an output of up to 350 t per hour and can be used to crush a wide range of different materials, Rubble Master says. This crusher allows for driving and […]
April 20, 2016
Construction Equipment
Hyundai’s new HL955 Tool Master loader configuration boosts lift capacity and more
Hyundai added another Tool Master configuration model to its HL lineup of wheel loaders with the unveiling of the 955TM at the Bauma show last week in Munich. The company launched the HL Series loaders last summer alongside its new HX Series excavators. And while the new loaders and excavators brought Tier 4 Final engine […]
April 19, 2016
Construction Equipment
Same horsepower, smaller block: Deutz boosts power density in new 5L engine
Fighting for its share of the world engine market, Deutz showed attendees at Bauma last week a new 5-liter TDC 5.0 engine. Designed from scratch, this engine has a clean, almost cube-like appearance owing to the fact that engineers incorporated many of what normally are bolt-on components into the actual block. This ultra compact engine drops […]
April 19, 2016
Construction Equipment
Komatsu unveils 3rd-generation, 36-ton HB36LC-3 hybrid excavator
Komatsu’s European leadership used the Bauma trade show last week to introduce its latest hybrid excavator, the 36-ton-class, 271-horsepower HB365LC-3. The company also updated the report it gave last year at Intermat on its intelligent machine population. The 80,000- to 82,342-pound HB365LC-3 follows the HB215LC-2 hybrid introduced at ConExpo in 2014.  (North American Komatsu executives […]
April 18, 2016
Construction Equipment
Genie’s new Z-60/37 FE boom lift operates in full-electric or hybrid drive modes; new Z-45/25XC doubles lift capacity
Driven by high-efficiency AC motors, the new Genie Z-60/37 FE boom lift provides two modes of operation: full-electric or hybrid. Introduced at Bauma last week, the machine can run a full week on a tank of diesel in the hybrid mode. In full-electric it has enough power to run for a day. A 24-horsepower, […]
April 18, 2016
Construction Equipment
Dana’s smart axles help prevent accidents; enhanced Powerboost technology drives improved telehandler performance
If your telehandler is about to tip over, chances are good the imbalance will be felt first in the axles, which is why Dana has come up with its Spicer Smart Suite package. The technology, debuted during the Bauma trade show in Munich last week, provides an intelligent load monitoring system (ILMS) for telehandlers to […]
April 18, 2016
Construction Equipment
Mustang/Gehl 608/650, 708/750 are Manitou’s largest articulated loaders yet
Marking the launch of the new articulated wheel loaders as a milestone for the company, at the Bauma trade show in Munich Manitou launched the Gehl 650/750 and Mustang 608/708. The company’s previous loaders were all in the 0-60 horsepower range, but these new loaders range in power from the 65 hp provided by a […]
April 15, 2016
Construction Equipment
Manitowoc intros Potain Hup 32-27; self-erecting crane is a strong lifter for tight spaces
With the introduction of the Potain Hup 32-27 at Bauma in Munich, Manitowoc has launched a new range of self-erecting cranes. These new Hup models will replace the Potain Igo cranes, offering high lift capacity at tall heights with a design well-suited to confined jobsites. “With the Hup 32-27 it’s really like having four cranes […]
April 15, 2016
Technology
Caterpillar’s Redbird drone integration will substantially deepen telematics data, and soon
As thousands of attendees milled about Caterpillar’s cavernous exhibit at the big Bauma trade show in Munich this week, a small red and black contraption hung quietly above the masses as they weaved between the hundred or so yellow machines on display. It’s a sight that in less than a few years’ time will be […]
April 14, 2016
Construction Equipment
Manitou unveils MRT 2150, 2550 Privilège + telehandlers with improved capacity
At the Bauma show in Munich, Manitou has introduced two new 5.5-ton-capacity Privilège + telehandlers. The new MRT 2550 replaces the current 2540 and has a lifting capacity of 80.7 feet while the new 2150 has a reach of 67.5 feet and represents a redesign from the previous generation of that machine. Manitou says both machines […]
April 14, 2016
Construction Equipment
John Deere Power Systems showcases “Stage V-ready” engine lineup at Bauma
The hardware on the 2.9-liter up to the 13.5-liter John Deere Power engines, already equipped with diesel particulate filters, is Stage V ready, says Carl Micu, John Deere Power Systems. Micu spoke with Equipment World at the Bauma trade show in Munich, Germany, this week. The Stage V European emission regulations, still three years away, […]
April 14, 2016
Construction Equipment
MTU’s Stage V Flex Package debuts capacitor-based engine starting technology
To meet Europe’s next round of emissions restrictions, MTU as developed an engine design that uses what the company calls its Emission Flex Package. The Flex Package will enable these engines to meet different world emissions requirements and adapt to different diesel fuel sulphur levels with nothing more than a software change to the engine […]
April 14, 2016
Previous Page
Page 2 of 3
Next Page