Caterpillar™s® new H65Ds hydraulic hammer is the company™s largest hammer option for compact equipment users. As the company™s entry into the 700 ft.-lb. (950 J) energy class and 2000 Bpm impact frequency, it expands the Caterpillar solutions available to those users.
The H65Ds capitalizes on the technology used in the H55Ds hammer introduced last year. Those innovations include:
- Simplified design to provide low owning and operating costs along with maximum performance, productivity, reliability, and durability.
- Enclosed housing to protect the power cell, eliminate side plate bolts, and reduce noise levels.
- Recoil isolation to protect the carrier from damaging reflective forces.
- Ultra high blow rate for greater productivity in concrete and asphalt applications.
- High and low pressure accumulator to protect the carrier hydraulic system and assist the power stroke of the piston.
- Caterpillar design means the hammer is matched to a Caterpillar carrier.
- One-piece body eliminates tie rods.
- Two-position hose mounting optimizes hose routing.
- Single bushing design combines three bushings into one for a slip fit and the ability to be replaced in the field.
The H65Ds is sized for use with all Cat® skid steer and multi terrain loaders as well as the following mini hydraulic excavators: 303.5C, 303C CR, 304C CR, and 305C CR. The new hammer is compatible with the Caterpillar pin grabber quick coupler system. For expanded versatility, the H65Ds can be equipped with a chisel, moil, spade or compacting plate.
For more information about the H65Ds hydraulic hammer, customers should contact their local Cat dealer or visit the web site at www.cat.com.
|Recommended carrier weight|
6,614-14,300 lb (3,000-6,500 kg)
597 lb (271 kg)
700 ft-lb (950 J)
|Acceptable oil flow|
11-28 gpm (40-105 lpm)
|Operating pressure||2,466 psi (170 bar)|