Talbert Manufacturing, a leader in the specialty-built trailer and transport system industry, launches its 50CC/RP Hybrid Trailer.
Combining the benefits of a close couple lowbed design with a roller paver model, the 50CC/RP offers a longer loading incline and best-in-class lift capacity of any trailer on the market. This allows the hybrid trailer the ability to haul a greater range of equipment, from loaders and excavators to rollers and pavers.
Additionally, the specialty design provides versatility for a larger audience of contractors including general construction, grading, excavation and pavement.
With a deck length of 26-feet, the new 50CC/RP offers the space for full construction fleet loads, while also featuring a specially-designed slope to allow easy transport of rollers and pavers. The design slopes from the bottom up to create a more moderate incline over a greater distance, approximately a third of the deck length. Finish height at the front of the main beams is 8 ¾-inches. Additionally, the trailer features a bolt-on ramp to provide a more gradual load angle at the rear; 15-degrees rather than the standard 35-degree angle. The 50-ton capacity 50CC/RP offers a deck width of 8-feet, 6-inches and a low deck height of 20-inches.
Designed for ease of operation, loading and unloading, the 50CC/RP Hybrid is a non-ground bearing hydraulic gooseneck trailer. Air ride suspension provides a smoother ride, while Talbert’s +3 / -3 control system allows fast and easy height adjustment of the lower and back end.
The 50CC/RP is four-axle capable, offering even greater versatility. It features three axles with fourth axle pin-on configuration. Axle capacity is 25,000-pounds each. To accommodate varying state laws, the trailer offers a dual kingpin setting of 108 and 90.
Built for strength and reliability, the 50CC/RP features a 4 main beam design and T1, 100,000-PSI minimum yield steel construction. The loading ramp is wood-filled and double-hinged to provide strength and traction needed for heavy equipment. To ensure a solid base for any load, Aptiong flooring offers proven performance and durability. Other standard features include rear-loading fenders, LED lights, strobes and battery backup.
Talbert’s newest trailer was designed for Hale Trailer Brake & Wheel, a Talbert dealer for more than 20 years, headquartered in Voorhees, N.J. Hale’s Concord, N.C. branch partnered with Talbert for the World of Asphalt/AGG1 tradeshow and purchased the original model displayed on the show floor. The new trailer complements Talbert’s full product line, while also enhancing the line for the roller paver market.
Founded in 1938, Talbert Manufacturing provides the most complete line of heavy haul trailers and specialized transportation equipment for the commercial, industrial, military and government sectors; and in applications that include renewable energy, aerospace, heavy construction, in-plant material handling, manufacturing and processing systems, and much more. For more information, contact Talbert Manufacturing, 1628 W. State Road 114, Rensselaer, IN 47978, call 800-348-5232, fax 219-866-7060, email firstname.lastname@example.org or visit the website at www.talbertmft.com.