CASE Stump Grinders offer the following advantages:
– Models available for standard flow and high flow skid steers.
– Grinds stumps up to 12 inches below ground level.
– 60 degree range of motion covers 45 inches in a single sweep.
– Chips thrown away from loader protects operator.
Specifications:
Model |
CG40 |
CG60 |
Overall length |
64.1 inches (1.63m) |
64.1 inches (1.63m) |
Telescopic extension |
7 inches (178mm) |
7 inches (178mm) |
Horsepower delivered |
To 40 HP (29.8 kW) |
To 60 HP (44.7 kW) |
Cutting height above ground |
21 inches (533 mm) |
21 inches (533 mm) |
Cutting depth below ground |
16 inches (406 mm) |
16 inches (406 mm) |
Cutting wheel width |
3.25 inches (83 mm) |
3.25 inches (83 mm) |
Cutting width |
60 inches (1.52 m) |
60 inches (1.52 m) |
Swing range |
140° |
140° |
Type of teeth |
0.5 inch (12.7 mm) slanted, carbide tip |
0.5 inch (12.7 mm) slanted, carbide tip |
Number of teeth |
32 |
32 |
Wheel diameter |
18 inches (457 mm) |
18 inches (457 mm) |
Wheel speed (approx.) |
900 RPM |
900 RPM |
Weight |
775 lb (352 kg) |
840 lb (381 kg) |
Driveline |
High-torque gerotor motor |
Planetary/piston |
Minimum required flow |
25 GPM (91 L/min) |
30 GPM (98 L/min) |
Maximum flow |
30 GPM (98 L/min) |
46 GPM (174 L/min) |
Minimum pressure required |
2000 PSI (138 BAR) |
2000 PSI (138 BAR) |
Maximum pressure |
3000 PSI (207 BAR) |
5000 PSI (345 BAR) |
