Kold Flo is a safe, easy-to-use, modified asphalt emulsion crack filler designed for maintenance of asphalt and concrete pavements. It prevents cracks from becoming potholes by sealing them from the weather™s destructive freeze and thaw cycles. Kold Flo is ideal for roads, highways, parking lots, and driveways. When properly applied, Kold Flo can be driven over within 30 minutes without tracking.
Ready to Use:
Kold Flo is available in 55-gallon drums, 5-gallon pails and easy pour 1-gallon bottles. No waiting for kettles to heat up means crews are ready to go in minutes. Apply Kold Flo from the original container, with a pour pot, or a drum pump for faster application. No special equipment or training is required. Homeowners and do-it-yourselfers especially like the 1-gallon bottle with pour spout for easy use around the house.
Safe and Easy Application
Kold Flo crack filler is safe and easy to use. No heating means no burns. It™s ready-to-use with
no wasted material.
Kold Flo is applied in an
easy three-step process
- Blow or sweep debris from cracks.
- Pour Kold Flo into the crack, 3/4 of the length. Allow a few minutes for Kold Flo to seep down into the crack.
- Using a U shaped squeegee, push Kold Flo into the crack allowing the excess to fill the remaining 1/4 length of the crack. If cracks are deeper than 2, a second application may be required. Use on cracks between 1/4 and 1 wide.
Use UPM® Permanent Pavement Repair Material for larger
cracks or deteriorated expansion joints.