Three New Compact Track Loaders Extend the Caterpillar® Range of Rubber-Track Models

Three models of compact track loaders, the 279C, 289C and 299C, are the newest additions to the Caterpillar® line of rubber-track loaders. The new loaders feature durable, steel embedded track and steel undercarriage components for maximum life in aggressive applications. The new tracked machines deliver solid traction and reduced wear on sites with sticky, rocky soils.

The new compact track loaders combine a freshly engineered suspension-type undercarriage, designed and built by Caterpillar, with the chassis of their multi terrain loader counterparts, the 277C, 287C and 297C. The fully suspended undercarriage employs four independent torsion axles for a superior ride and excellent bucket load retention. Class leading track-on-ground of almost 70 inches (1767 mm) provides good flotation and traction, low ground pressure and long track life.

All three models feature two-speed drive systems, with a maximum speed of 8.5 miles per hour, for fast movement around large sites. The electrohydraulic joystick control of the drive motors delivers straight-line tracking, and electronic torque management optimizes productivity. Caterpillar exclusive drive motor seal guards extend the lives of seals and final drives.

The new models have rated operating capacities of 3,200, 3,850 and 4,150 pounds (1451, 1746 and 1882 kg), at 50 percent of tipping load. Net-horsepower ratings are 82 (61 kW) for the 279C and 289C, and 90 (67 kW) for the 299C. Lift-arm-path design is radial for the 279C and vertical for the 289C and 299C.

The new compact track loaders complement the Caterpillar multi terrain loaders, which feature very low ground pressure for high flotation and little ground disturbance. Multi terrain loaders also offer the best ride and highest travel speeds of all compact tracked machines. Now customers can choose the machine that best suits their primary applications.

Robust new undercarriage
At the heart of the Caterpillar compact track loader design is a robust new undercarriage. It uses an external-type sprocket, steel track rollers and idlers, conventional spring-type (grease-adjusted) recoil mechanism and rubber tracks that incorporate the reinforcing strength of steel”both as steel cords that run longitudinally through the tracks and as steel inserts at the sprocket-engagement points. The design emphasizes durability and aggressive traction, suiting it particularly well for applications in which maintenance, operator technique and underfoot conditions might present challenges.

Partner Insights
Information to advance your business from industry suppliers

In addition to its heavy-duty construction and heavy-duty performance, the compact track loader undercarriage also is designed to be easy on the operator and easy on the machine.  Because the undercarriage is suspended via a pair of torsion axles on each side of the machine, each track assembly can flex independently, resulting in a softer ride for the operator, reduced shock loads through the machine and minimal spillage from the bucket in rough going. And with nearly 70 inches of track-on-ground, the 18-inch-wide rubber tracks exert low ground pressures, while providing added traction and long service life.

Power train and hydraulics
Powering the three new loaders is the Cat® C3.4T diesel engine, an inline, four-cylinder, turbocharged model with a 201-cubic-inch (3.3-liter) displacement. The engine is designed with premium Caterpillar features, including high-load-carrying bearings, induction-hardened cylinder liners, forged-steel/super-finished crankshaft, positive-displacement gear-pump lubrication system and gear-driven coolant pump.

The engine powers a two-speed hydrostatic drive system, which provides a travel speed of 8.5 mph (13.6 kph) in second range”and which is standard equipment for the new 279C, 289C and 299C models. The drive system is engineered to electronically balance torque and speed delivered to the tracks, a feature designed to promote optimum performance and fuel efficiency in any application, whether aggressively digging in a sticky clay bank, loading trucks or doing drawbar work. To complement the efficient design of the drive system, the drive motors incorporate Caterpillar™s exclusive seal guard, which helps protect the motors from damage.

Electronic control of the drive system allows continual fine-tuning of the engine, drive pumps and drive motors to deliver controlled tractive effort, but always in combination with ample hydraulic power for the implement (lift and tilt) and auxiliary circuits.  Standard hydraulic flow is 22 gpm (84 lpm), and rated system pressure is 3,335 psi (23 000 kPa). The auxiliary-hydraulic system uses a large variable-displacement load-sensing pump, provides a continuous-flow feature and incorporates heavy-duty, flat-faced quick-disconnect couplings.

For applications requiring added hydraulic horsepower, Caterpillar offers the optional High Flow XPS auxiliary-hydraulic system, which delivers 33 gpm (125 lpm) at a system pressure of 4,061 psi (28 000 kPa). The XPS system allows the new machines to efficiently handle such demanding work tools as a cold planer and a brush cutter.

A mechanical quick-coupler is standard equipment, and a hydraulically controlled coupler is available. For added control, the optional Advanced Machine Information and Control System (AMICS) allows the operator to select the level of loader-arm and bucket responsiveness, while also providing 10 work-speed selections.

Operator/technician amenities
To enhance controllability and ease of operation, the new models are equipped with a foot throttle, which allows the operator to adjust engine speed to suit the application, while also reducing sound levels and conserving fuel. This feature complements the independently adjustable joystick controllers, which are console-mounted to provide ample forearm support. The operator station is equipped with a suspension seat.

 The optional enclosed ROPS cabin is sealed, pressurized and heated, with ventilation air filtered to eliminate dust. An available air-ride seat and air-conditioning further enhance the operator environment. The design positions the seat and surrounding enclosure to enhance visibility, and a quick-release door and safety interlock system prevent accidental machine movement.

Lift-arm safety braces are designed for easy use, and routine-maintenance features include a rear door that swings open 90 degrees to provide ready access to service points. Also, the cab tilts up for wide-open access to drive-system and hydraulic components.

For more information about the new Caterpillar 279C, 289C and 299C Compact Track Loaders, customers should contact their local Caterpillar dealer.

Basic Specifications for 279C, 289C and 299C Compact Track Loaders

 

279C

289C

299C

Rated op. capacity (50% tipping load)

3,200 lb (1415 kg)

3,850lb (1746 kg)

4,150 lb (1882 kg)

Operating weight

9,892 lb (4487 kg)

10,365 lb (4702 kg)

10,730 lb (4867 kg)

Engine model

Cat C3.4T

Cat C3.4T

Cat C3.4T

Net engine power

82 hp (61 kW)

82 hp (61 kW)

90 hp (67 kW)

Hydraulic power:

   Standard

   High Flow XPS

 

22 gpm (84 L/min)
3,335 psi (23 000 kPa)

33 gpm (125 L/min)
4,061 psi (28 000 kPa)

 

22 gpm (84 L/min)
3,335 psi (23 000 kPa)

33 gpm (125 L/min)
4,061 psi (28 000 kPa)

 

22 gpm (84 L/min)
3,335 psi (23 000 kPa)

33 gpm (125 L/min)
4,061 psi (28 000 kPa)

Linkage type

Radial

Vertical

Vertical

Bucket pin height at max. lift

123 in. (3128 mm)

127 in. (3239 mm)

129 in. (3286 mm)

Travel speed:

   One speed

   Two speed option

 

5.0 mph (8.1 kph)

8.5 mph (13.6 kph)

 

5.0 mph (8.1 kph)

8.5 mph (13.6 kph)

 

5.0 mph (8.1 kph)