Modular and portable, the Rhino Wheelwash system can be set up and running on any jobsite within a few hours – all you need is a concrete pad or crushed stone base and access to water and electric power. Operators remain in the cab and drive onto the angle grid system, which causes the treads to spread and vibrates off mud and debris. High-pressure water jets scour the tires and undercarriage. Upon exiting, another angled grid system shakes off excess water. Wash times typically run from 15 to 45 seconds, but you can program the system to run for up to three minutes per vehicle.
Wheel wash system leaves mud behind
December 19, 2002