The New 3-Stage, Multi-Ripper Bucket
From Leading Edge Attachments, Inc.
Patent Pending in US and Canada
- What is a Multi-Ripper Bucket? Designed to handle severe frost and rock removal jobs, the Leading Edge Attachments, Inc.™s Multi-Ripper Bucket is an engineering breakthrough that works on the same principal as the award winning Multi-Ripper! Just like the Multi-Riper, the Multi-Ripper Bucket can be used for a wide range of tough material applications such as excavating frozen ground, coral, sandstone, limestone, shale, decomposed granite and caliche. This unique patent pending design has demonstrated that it can dig faster than using a single pointed ripper tooth. Under severe digging conditions, the performance also exceeds other designs of frost, rock, Vee-trenching, DigNRip Buckets, or other styles of ripper bucket combinations. The Multi-Ripper Bucket is the absolute best and most productive ripper bucket combination available on the market! The new Multi-Ripper Bucket is available to fit any excavator or backhoe above 11,000 pounds.
- How Leading Edge Attachment, Inc.™s Multi-Ripper Bucket Works: The Multi-Ripper Bucket is similar to the Multi-Ripper and functions similarly to that of a trencher except it uses the hydraulic excavator rolling action to rip. The staggered ripper teeth fracture the substrate in sequential order. No two ripper teeth align with each other, so that the maximum breakout force is applied sequentially to each tooth. The distance from the excavator stick pivot to the tooth tips is also shorter than the standard bucket for the machine. The shorter distance actually multiplies the tooth tip force. The castle top shape groves cut by the front ripper teeth facilitates the fracturing process of the next swipe. The rolling of the Multi-Ripper Bucket, by extending the bucket cylinder, always provides the full multiplied breakout force individually on each tooth so that the substrate is ripped out by each individual tooth lifting action. The result is a relatively flat trench bottom due to the fact that the ripper tooth tips all lie on a constant radius with a center of rotation that is close to the tractor loader backhoe or hydraulic excavator dipper stick bucket pivot. Due to the leading edges and the back-sheets, the Multi-Ripper Bucket can also scoop material, thus eliminating the need to switch back to a bucket for clean up. The Multi-Ripper Bucket will function, and greatly exceed, any application, or material, that a single pointed ripper tooth can be used for.
- Multi-Ripper Bucket Operating Procedure: With the stick in the near vertical position, use a combination of bucket and crowd cylinder functions while providing boom cylinder down pressure. The bucket cylinder action provides the greatest force while the stick sweeps. Since no two teeth are in alignment, when the Multi-Ripper Bucket is rolled, each tooth engages separately so that each tooth fractures the groove cut by the preceding tooth. Roll the Multi-Ripper Bucket completely as the stick is being moved so that all teeth have engaged the material. The Multi-Ripper Bucket is to be rolled as the stick is moved, thus causing a very powerful, fast and effective ripping and scooping motion that is easy on the machine and operator and is highly effective.
4. What makes this product different from its competitors? The Multi-Ripper Bucket is different from anything on the market. There is no excavator ripper bucket combination that has multiple shanks staggered and on an arc so that each tooth hits individually. The closest products on the market in function, that the Multi-Ripper Bucket will outperform or replace are other ripping bucket designs similar to the LEA DigNRip Bucket, or the single pointed ripper.
a. The Multi-Ripper Bucket is More Productive than the Vee Trenching Bucket or the DigNRip bucket designs or othe ripper bucket combination designs because it is more like a ripper than a bucket! The Multi-Ripper Bucket has only three teeth that engage one tooth at a time. There is no other bucket that engages throughout its travel while engaging one tooth at a time. The DigNRip style has teeth on the corners of the bucket that engage at the same time and thus effectively cut down on the ripping force by a factor of two! No other bucket has this ripping ability!
b. The Multi-Ripper Bucket greatly out produces the single-pointed ripper because it can rip and scoop the broken material out of the way at the same time! Not only are the forces higher and there are more teeth to rip, but there is now way to scoop the material out of the way to expose virgin material. The process of switching back and forth from the ripper to the bucket can be time consuming in some applications. It is obvious that the Multi-Ripper Bucket is at least three times faster than a single pointed ripper because it has three teeth; however, it is actually 10 times faster because of the force multiplication, the multiple teeth, and its ability to scoop the material out of the way.
Call Toll Free: 866-928-5800 Fax: 508-829-4822 email: firstname.lastname@example.org