MaxTrac's 6.5-Inch Nissan Titan Lift System for 35-Inch Tires

6.5-Inch Nissan Titan Lift System by MaxTrac Fits 35-Inch Tires

Lifted Nissan Titan

Anaheim, Calif. — MaxTrac Suspension has released a cost-effective solution for two-wheel-drive 2004-2011 Titan owners who want to run up to 35-inch-tall tires. MaxTrac maximizes value and ground clearance by eliminating the replacement front crossmember included in some competing kits. Instead, MaxTrac uses one-piece spindles that are cast from ductile iron and are e-coated for corrosion protection. These spindles provide four inches of lift. Steering angles are retained, and the factory rack-and-pinion system remains in its stock location.

To maintain factory ride quality, the front lift also includes strut spacers. MaxTrac uses laser-cut 1/4-inch-thick plate for these fabricated spacers, which are finished in high-gloss grey metallic powdercoat. They mount on top of the OE coilovers. Extended-length DOT-compliant braided-stainless steel brake hoses are also part of the package.

Rear lift is achieved with 4-inch fabricated steel blocks (which are gloss-grey metallic powdercoated) with proper-length U-bolts. Rear upgrades also include extended-length gas-charged shocks. To correct the driveline angle following the lift, MaxTrac includes a carrier bearing spacer, which is finished in gloss-grey metallic powdercoat.

MaxTrac estimates installation time at 4-6 hours, depending on the installer’s experience. No welding or cutting is required. However, brakes have to be bled after installing the kit’s braided-steel hoses. Headlights should be re-aimed at the end of the job.

For Titan owners who want more flexibility, MaxTrac also offers its 6.5-inch kit’s components individually. Other Titan options include a 2.5-inch spacer-style front leveling kit, which provides clearance for 285/70-17 tires. Using the 4-inch front spindles alone accommodates up to 33×12.50-17 tires. For Titan owners who want either a nose-high pre-runner look or a raked factory stance, MaxTrac offers 1-inch-lift rear shackles as well as 1-, 2- and 3-inch tapered rear blocks.

All MaxTrac Suspension systems are meticulously engineered and tested. MaxTrac components are backed by a limited lifetime warranty.

Partner Insights
Information to advance your business from industry suppliers
Stop Wasting Time on Grade Checks
Presented by Hemisphere GNSS

For more information, please contact MaxTrac Suspension, 4030 E. Leaverton Ct., Anaheim, CA 92807, 714-630-0363, www.maxtracsuspension.com, [email protected].