Marketplace

Size it up
Topcon Positioning Systems’ GLS-1000 scanner acts as a stand-alone unit without external computers, cables or heavy batteries. With its internal memory, batteries and bright display screen, the GLS-1000 can operate in harsh conditions or direct sunlight. The scanner’s Precise Scan Technology uses time of flight measurement and phase-base analysis for accurate measurement.


Extend your reach
Genie’s redesigned S-80 and S-85 telescopic booms include fixed width axles, virtual pivot boom assembly and faster elevation. The fixed axles have an 8-foot 2-inch total machine width, and allow the boom to be driven right off the trailer. The pivot boom design maintains boom weight over the chassis’ center of gravity as it elevates, eliminating the need for extra counterweight.


Break through
Atlas Copco’s SB 302 solid body breaker completes roadwork, trenching, general demolition and primary and secondary rock breaking at a higher impact rate than previous models. For use with excavators up to 9 tons, the breaker’s new body design generates lower vibrations and less noise, while remaining compact enough to work in confined areas.


Position pipes precisely
Equipped with a Cat C6.6 ACERT engine, Caterpillar’s PL61 pipelayer offers an 18-foot, hook and cable controlled boom constructed of high tensile strength steel, a closed-loop hydrostatic drive system, an oval-track SystemOne undercarriage and 40,000 pounds of lift capacity. An electronically enhanced operator station enables precision control.


Position pipes precisely
Equipped with a Cat C6.6 ACERT engine, Caterpillar’s PL61 pipelayer offers an 18-foot, hook and cable controlled boom constructed of high tensile strength steel, a closed-loop hydrostatic drive system, an oval-track SystemOne undercarriage and 40,000 pounds of lift capacity. An electronically enhanced operator station enables precision control.


Dust buster
Equipped with 1,200-watt power and automatic filter cleaning technology, Hilti’s VC20-U and VC40-U vacuums maintain constant high suction performance so you can work in a virtually dust free environment. The valve opens automatically every 15 seconds, reversing air flow three times per millisecond, shaking the filter clean. The vacuums stop automatically when full.


Tread on
Bridgestone Bandag Tire Solutions’ Firestone FD835 on-/off-highway drive delivers traction and removal mileage in severe-service applications. The FD835’s tough tread compounds combat cuts, chips and tears for long tread life. Thirty angled sipes positioned in each block cut through rain for solid wet-surface handling, and a deep open shoulder provides traction on soft surfaces.


Load hog
Elliott Equipment’s 40105 40-ton capacity boom truck with 105 feet of powered main boom and a 115-foot tip height incorporates glide swing operation for precise rotation. The 32- to 49-foot two-piece jib has a FrictionFree extension for jib deployment and stowage. Options include a wide area definition system and a variety of jib lengths, platforms and accessories.


Tool monitor
OEM Data Delivery’s ST-900 Service Tracker tracks equipment activity at multiple construction sites. Data generated includes cumulative machine hours, equipment location, idling versus work logs, mileage and other user-specified indications, such as PTO time. The ST-900 can also integrate a fuel management function.


Make the grade
ATI’s Level Best fully automatic grading box uses electric power to eliminate expensive hydraulics. The box comes in five widths from 48 to 72 inches wide and grades to 1/8-inch accuracy in elevated spaces. It easily installs on smaller tractors and utility vehicles, and comes equipped with flat-proof flotation tires.