Tag: BOMAG: Page 6

Roadbuilding

Bomag’s TanGO exciter system improves vibration

Bomag has introduced its Tangential Oscillation (TanGO), an exciter system that is designed to improve power for vibration generation while reducing drive belt maintenance requirements. The system is created for use on bridges and near buildings, but can also be used for intermediate and finish rolling. TanGO’s horizontal placement allows it to maintain continuous ground […]

November 1, 2013

Construction Equipment

Tackle steep grades with BOMAG’s new BW138AC-5 combination roller

Handle a range of compaction jobs including commercial parking lots, highway shoulders and secondary roadway maintenance with BOMAG’s BW138AC-5 roller, which features a traditional vibratory steel drum in the front and four smooth pneumatic tires at the rear for enhanced tractive effort. The 4.5-ton, 54-inch-wide roller has a Tier 4 interim four-cylinder Kubota diesel engine. […]

October 24, 2013

Roadbuilding

Bomag BW138AC-5 roller features vibratory steel drum, smooth pneumatic tires

Bomag has introduced the BW138AC-5 combination roller, designed for asphalt compaction and steep grade applications. The 54-inch-wide roller and features a traditional vibratory steel drum in the front and four smooth pneumatic tires at the rear, creating a combination design. A Tier 4i 4-cylinder Kubota diesel engine powers the 4.5-ton machine. The BW138AC-5 has a large […]

October 23, 2013

Construction Equipment

After sale of roadbuilding equipment, Terex to upgrade, repurpose Oklahoma City plant

Following the sale of its roadbuilding equipment to Fayat Group earlier this year, Terex says it will upgrade and repurpose its 700,000-square-foot facility in Oklahoma City to manufacture multiple product lines. A press release issued today, however, offered no details on what Terex products would be manufactured at the facility or specific upgrade plans. Terex […]

October 16, 2013

Roadbuilding

Bomag BW141AD-5, BW151AD-5 tandem vibratory rollers feature crab-walk, intelligent design

Bomag has introduced the BW141AD-5 and BW151AD-5 tandem vibratory rollers with high VPM performance and increased fuel efficiency over previous models. Tier 4, 73.2-horsepower Kubota water-cooled diesel engines power each of the rollers, while an ECOMODE system reduces fuel consumption by up to 30 percent by adjusting engine speed for the load. The BW141AD-5 and […]

October 4, 2013

Construction Equipment

BOMAG’s new BW141AD-5, BW151AD-5 tandem vibratory rollers reduce fuel, boost comfort

BOMAG’s new BW141AD-5 and BW151AD-5 tandem vibratory rollers, boast increased fuel efficiency and provide high VPM performance on asphalt compaction jobs such as commercial sites, parking lots and highways. The rollers’ frame design provides clear operator visibility, ensuring all-around views of the roller drums, asphalt mats and surrounding areas. The operator’s platform has a comfortable, […]

September 25, 2013

Roadbuilding

BOMAG to end Kewanee operations, relocate to southern U.S.

BOMAG Americas will discontinue manufacturing operations at its Kewanee, Illinois, plant by the end of 2014 and relocate to somewhere in the southern United States, according to a report from our sister site, Equipment World. The new location has not yet been determined. BOMAG’s products produced in Kewanee — single drum rollers, asphalt rollers and […]

August 29, 2013

Business

BOMAG exits Kewanee plant, plans new facility in southern U.S.

BOMAG Americas says it will cease manufacturing operations in Kewanee, Illinois, by the end of 2014 and relocate its business in a yet-to-be-determined location in the southern United States. BOMAG says its Kewanee-produced products—single drum rollers, asphalt rollers, and a reclaimer/stabilizer—will either be relocated to the new plant or be replaced with “market-accepted products manufactured […]

August 29, 2013

Roadbuilding

Jesco expands Bomag product offering, territory

Jesco, Inc., a Bomag distributor headquartered in New Jersey, has expanded its territory and its Bomag product line offering. With this expansion, Jesco, now a full-line Bomag equipment distributor, offers Bomag products to contractors in the Hudson Valley and Long Island in New York, nearly the entire state of Maryland, and in the states of […]

August 8, 2013

Roadbuilding

Bomag introduces BW100AD-4 tandem vibratory roller with maximized maneuverability

Bomag has introduced a new tandem virbatory roller, according to a report from our sister site, Equipment World. The BW100AD-4 tandem vibratory roller, powered by a a Tier 4 interim 32.6-horsepower Kubota diesel engine, produces up to 8,350 pounds of centrifugal force and offers a maximum frequency of 4,200 vibrations per minute. The roller is […]

July 25, 2013

Construction Equipment

BOMAG’s new BW100AD-4 tandem roller delivers visibility, maneuverability

BOMAG has announced its new BW100AD-4 tandem vibratory roller, featuring a Tier 4 interim 32.6-horsepower Kubota diesel engine, up to 8,350 pounds of centrifugal force and a max frequency of 4,200 vibrations per minute. Designed to efficiently perform  asphalt and base compaction, road shoulder work, asphalt patch repair and more, the roller’s features include a standard […]

July 25, 2013

Roadbuilding

Bomag hires Tom Kiselica as road building specialist

Bomag Americas has hired Tom Kiselica as the road building specialist for the northeastern United States. Kiselica’s responsibilities will include providing equipment training, demonstrations and machine set-up services to customers for Cedarapids asphalt pavers and material transfer equipment, CMI reclaimer/stabilizers and BOMAG’s existing line of milling equipment. Kiselica has more than 30 years of experience […]

May 22, 2013