With speeds up to 6.2 mph, the MCR Series of excavators is “the fastest in the world,” according to French manufacturer Mecalac. The company entered the U.S. market two years ago at the 2017 ConExpo, and has 20 North American dealers with a headquarters in Boston.
One of several machines showcased at the Bauma show this week in Munich, Germany, the 8MCR model can use up to a 0.69 cubic yard maximum bucket, or the bucket size of a 12-metric-ton excavator. The 10MCR is capable of handling a 0.98 cubic yard bucket, which Mecalac says means the model can move up to 77 percent more when compared to standard same-size excavators.
Loader buckets, in addition, allow users to spread material or fine grade ground level in one pass only without the need to swing or move the boom, according to Mecalac. This, in turn, reduces total cycle time.
MCR machines are designed for digging trenches close to a wall or parallel to the machine, lifting loads, laying pallets over an obstacle or under ground level. The boom folds 130-degrees backwards and acts as a natural counterweight.
The MCR Series can use both skid and loader buckets in the reversed position, allowing operators to push and load larger volumes, says the company. In fact, the company refers to these machines as “Crawler Skid-Excavators” in a nod to their skid-steer-like capabilities. The bucket is supported against the blade so that “the force of the thrust is transmitted directly from the undercarriage to the bucket.”