Construction Equipment
Ag Equipment
Roadbuilding
Dealers
Business
Technology
Tag: Volvo G-Series wheel loaders
Roadbuilding
Volvo G-Series middle-weight wheel loaders
Volvo Construction Equipment says its new G-Series L60G, L70G, and L90G middle-weight wheel loaders feature loader arms with patented Torque Parallel linkage for superior breakout and lifting forces. The machines meet Tier 4 Interim emissions requirements and are fitted with a six-liter, six-cylinder, turbocharged V-ACT (Volvo Advanced Combustion Technology) off-highway diesel engine, which features cooled […]
June 6, 2012
Roadbuilding
Terex TA400 Generation 9 articulated truck
Terex Corp. says its new TA400 Generation 9 articulated truck is designed to keep productivity levels high, fuel consumption low, and cycle times short. The machine boasts a 444-horsepower Tier 4 Interim-compliant Scania DC13 engine with a maximum torque of 1,548 foot-pounds at 1,350 revolutions per minute and a fully automatic Allison transmission. Additional features […]
June 3, 2012
Roadbuilding
Hitachi: Hydraulic excavator overhaul
The Hitachi EX2500-6 ultra-large hydraulic excavator is heavier than its predecessor, has more engine horsepower, and the BE-backhoe version has increased bucket capacity. Estimated productivity increases are 13 percent for the short-reach BH backhoe, and 4 percent for the loader version. Loading time per truck has been lessened as well.  The bucket capacity […]
June 3, 2012
Roadbuilding
John Deere’s five technologies for business optimization
The John Deere WorkSight integrated suite of technology solutions for business optimization consists of five technologies including the following: JDLink machine monitoring system, Fleet Care proactive machine health program, Service ADVISOR, Remote dealer diagnostics, grade control, and payload weighing. The JDLink proprietary system provides machine location, utilization measures, and maintenance tracking via a Website. Two […]
June 3, 2012
Equipment
Intermat Preview — Digital Extra
INTERMAT MACHINE PREVIEWS Here’s a sneak peek at just a few of the hundreds of significant machine and component introductions that will be seen at Intermat 2012, in Paris France, April 16-21. For availability of these machines here, please consult with your equipment dealer, and note that the specs may differ between European and U.S. […]
April 12, 2012
Safety
Marketplace
FLEXIBLE FUNNEL Keep oils and fluids from dripping in even the tightest spots with the Form-A-Funnel draining tool from New Pig. The flexible tool bends to fit the space and then holds any shape, keeping fluids off of the shop floor and directing the flow into the drain. The Form-A-Funnel is constructed from moldable aluminum […]
March 2, 2011
Page 1 of 1