Construction Equipment
Ag Equipment
Roadbuilding
Dealers
Business
Technology
Tag: heavy equipment trailers
Trailers
Landoll trailer option transports equipment requiring lower deck heights
Landoll's new drop side trailer option features a 5-inch lowered track area and raised center for the 855 and 860 Construction Series Detachable trailers.
December 22, 2020
Trailers
Felling’s new Air Bi-Fold Ramps protect new road surfaces when trailering pavers
The new Air Bi-Fold Ramp system from Felling Trailers is designed to protect the surfaces beneath it, such as newly paved roads. The new system is featured on the company’s 25-ton FT-50-3 LP triaxle low-profile flatbed tag trailer and is designed with low-clearance machinery, such as pavers and directional drills, in mind. The system’s flip […]
April 8, 2020
Trailers
Talbert uses air bags to lift ramps on new Air Ramp Tilt trailers
Talbert's new Air Ramp Tilt Tag-A-Long Series of trailers are equipped with ramps that are raised and lowered by airbags for easier and safer use. Details here.
October 22, 2019
Trailers
XL’s new lowboy trailer features 15” deck height, 4.5” ground clearance
The XL Specialized Trailers Low-Profile Hydraulic Detachable Gooseneck trailer is has a capacity of 110,000 pounds in 12 feet and much more. Details here.
May 30, 2019
Trailers
Haul loads up to 55 tons with the Fontaine Magnitude 55L
Fontaine Heavy Haul's brand new lowbed trailers can carry additional payload without a spread axle configuration. Learn more about the heavy haul trailers here.
April 22, 2019
Trailers
Felling redesigns IT-I tilt trailers for strength, ease of use
Felling has revamped and redesigned its IT-I Series tilt trailers for 2020 to make them stronger and easier to use. Check them out now on Equipment World.
February 7, 2019
Trailers
Talbert heavy-haul trailer, 60CC/55SA-LD, adjusts to meet states’ rules
Talbert Manufacturing’s lowboy trailer can be configured in a variety of ways to help operators meet differing state regulations. Learn more about it here.
December 31, 2018
Trailers
Load and unload at ground level with Felling’s new EZ-T tilt trailer
With an eye toward the rental market, Felling Trailers has launched its FT-12 EZ-T tilt trailer that allows operators to drive equipment on and off the trailer at ground level. The company says the new trailer comes in handy for loading, unloading and transporting floor sweepers, scissor lifts, rollers and other equipment with low ground […]
April 27, 2018
Trailers
XL Specialized intros new lowboy, low-weight galvanized trailer models
By Matt Cole XL Specialized Trailers debuted two new lowboy trailers at the recent Mid-America Trucking Show. One of the company’s new offerings is the XL Galvanized 80 Mechanical Full-Width Gooseneck. Erin Reiff, marketing manager for XL Specialized, says the company was able to cut weight from the trailer before the hot-dip galvanizing process in […]
April 4, 2018
Trailers
Talbert’s new 35CC trailer designed for unloading equipment in tight spaces
Talbert’s new 35CC-HRG lowbed trailer, unveiled Tuesday at the ICUEE show in Louisville, Kentucky, is designed to load and unload construction equipment in tight spaces with its beavertail and ramps. The beavertail and spring-assisted ramp, which can be raised and lowered, allows operators to drive equipment over the back of the trailer without having to […]
October 4, 2017
Trailers
Trail King fights corrosion with new Commercial MG-HG trailer
Corrosion-resistance was made a top priority for Trail King’s Commercial MG-HG detachable gooseneck trailer. The company designed the structure with no moisture-trapping areas and primed and painted the entire trailer before adding air, hydraulic and electrical lines and decking. For further corrosion-resistance, an optional lightweight aluminum version of the trailer is available, including aluminum I-beam […]
August 30, 2017
Page 1 of 1