Side by Side: CJ-4 vs. CI-4/CI-4 PLUS oil

On January 1, by federal mandate, refineries cut the sulfur level for on-road diesel fuel to 15 parts per million from 500 ppm. And all diesel highway truck engines manufactured after this date are now required to funnel their exhaust through what’s known as a diesel particulate filter – something akin to a big catalytic converter. The DPFs and the ultra low sulfur diesel fuel work together to reduce exhaust emissions, and the ULSD fuel also helps slow down the buildup of particulate matter inside the DPFs.

But in the testing and development of the 2007 on-highway engines, manufacturers also found that sulfur, ash and phosphorous from burned engine oil clogged up DPFs as well. So for the fourth time in as many years the engine manufacturers and oil industry worked up a new oil standard, CJ-4, with lower levels of ash, sulfur and phosphorous. (A word about nomenclature: CJ-4 is an industry wide specification for a category of oils designated by the American Petroleum Institute. Previous categories included CI-4 PLUS, CI-4 and CH-4, each of which was driven by the needs of low-emissions engine designs.)

By all accounts, the new CJ-4 oils are the best, most robust oil formulations in history. But they are not a slam dunk for all occasions. Some reports indicate that the DPFs may not be clogging as fast as originally anticipated. And the government has not mandated DPFs for off-road machines (yet). So contractors, especially those with mixed on- and off-road fleets, are scratching their heads trying to figure out the best lubrication program for their businesses. Do you stock one oil or two?

Here’s a look at the pros and cons of using CJ-4 in a variety of engines and equipment. Keep in mind that regardless of what’s said here you must follow the recommendations of your engine manufacturer to maximize the life of the engine, maintain drain intervals and protect your warranty.

Handling heat and soot
The additive packages in oil, the chemicals that neutralize acids and hold soot in suspension, deplete over time. High engine temperatures cause much of this depletion and oil providers have been ratcheting up the thermal stability of their additives ever since the first low-emission, exhaust gas recirculation (EGR) diesel engines were introduced in 2002/2003.

Partner Insights
Information to advance your business from industry suppliers
Selecting the Correct Construction Tire Solution
Presented by Michelin North America
8 Crucial Elements of a Tire Safety Program
Presented by Michelin North America
How High Fuel Prices hurt Your Business
Presented by EquipmentWatch

And heat impacts off-road engines much more than on-highway, says Ken Chao, petroleum products support at John Deere Power Systems. “Off-highway engines work much harder in a heavily loaded condition, plus they don’t get the cooling effect from highway travel. And every time you raise the temperature 10 degrees Celsius, you double the oxidation rate of the oil.”

In order to get the low sulfur, ash and phosphorous levels needed to meet the CJ-4 spec, the oil companies changed to a new group of additives that they say provide the best thermal protection yet. “Regardless of the engine, CJ-4 is a superior oil, says Mark Betner, heavy duty product manager for Citgo Lubricants. “You have a more oxidatively stable oil compared to CI-4 and CI-4 PLUS. And we’ve seen double the soot handling capability compared to CI-4 PLUS,” he says. “If you have a 2003 dump truck, CJ-4 would still be the better oil for it.”
Advantage: CJ-4.

Neutralizing acidity
In addition to running hotter, the 2002/2003 EGR engines created a more acidic environment. To combat this, the oil companies formulated CI-4 and CI-4 PLUS with a higher “TBN,” the industry term for total base number, or the amount of “Rolaids” for the engine as it were. The acidity came from sulfur in the fuel, but with the cut from 500 ppm to 15 ppm sulfur for all on-highway fuels, the engine acidity issue just about vanished – at least for most highway trucks. (The higher EGR rate, however, will introduce more nitric acids into the crankcase to deplete TBN.) Knowing this, the oil companies formulated the CJ-4 oils with a lower TBN.

The ideal TBN number depends on who you ask. Some engine manufacturers prefer more alkaline reserve, a higher TBN, in their oils than others – yet another good reason to check with your OEM about the preferred or required oil specs.

But the issue gets complicated for mixed fleets with off-road equipment and 2007 on-road trucks. “Until June 2007, there are still going to be some pockets of high-sulfur fuel available for off-road equipment,” Chao says, “and CI-4 was designed for this high sulfur fuel.” CJ-4 was formulated with enough alkaline reserve to combat 500 ppm fuel, but not the high sulfur 5,000 ppm fuel. CJ-4 won’t cause anything drastic to happen in an off-road engine burning high sulfur fuel, but it would likely require you to shorten your drain intervals. “And nobody wants to pay a higher price and reduce service intervals,” Chao says.
Advantage: CI-4 for off-road equipment burning high sulfur fuels. A tie otherwise.

Costs
CJ-4 costs more, anywhere from 5 to 30 percent depending on the brand. But keep in mind total costs, including drain intervals. One of the goals in formulating CJ-4 was to at least meet the drain interval performance of CI-4 and CI-4 PLUS. But each engine manufacturer is going to have its own recommendations that you’ll have to factor in. Once the sulfur levels in off-road fuel drop from 5,000 ppm to 500 ppm in June, it may be more cost effective over the long term to put CJ-4 in all your trucks and equipment if it can be shown that it extends drain intervals – as a premium oil should.
Advantage: Depends on service intervals.

Cleaning the DPF
With the Environmental Protection Agency breathing down everybody’s necks, the technology for the 2007 on-highway engines developed so quickly that some questions remain as to how much maintenance the DPFs are going to require. The EPA requires the filters to last at least 150,000 miles before cleaning. That appears to be a target that will be easily met.

“I have not seen a single data point where people used CI-4 PLUS in a 2007 on-highway engine that actually failed the EPA requirement for 150,000 miles,” says Chao. “So its no big deal to use CI-4 PLUS oil and meet that limit.” Cummins has said it will allow highway engine customers the flexibility of using CJ-4 with a projected DPF cleanout at 200,000 to 400,000 miles or CI-4 with a DPF cleanout every 150,000 to 350,000 miles.

Advantage: CJ-4 extends maintenance intervals on the DPF, but to determine the value of this you have to balance the cost of the oil with the cost of more frequent service intervals.

Wildcards
Given the shortened time frame the engine manufacturers and oil companies have had to work with, there are still a lot of unanswered questions – especially regarding the DPF. The amount of oil an engine burns depends on its design and age. A new engine with tight seals and rings burns less oil and hence will push less particulate matter into the exhaust stream, Betner says. An older engine will create more. “If you’re going to keep an engine for a million miles you might find you will have to clean the filter more often,” Betner says.

And different CJ-4 formulations will contain different additives that clog the DPF in different ways. “Ash that collects in the DPF can have a different packing density,” Chao says. “If one formula results in a low packing density, it won’t affect the backpressure as much because it’s more porous. A more densely packed ash will have a pronounced effect on backpressure.”

Conclusion
If you’re running 2006 or older trucks and off-road equipment there is no urgent need to migrate away from CI-4 or CI-4 PLUS oils. These are robust oils in their own right. But when you buy your first 2007 or later model on-highway truck, you’ll need to decide if you want to stick with the old oils and clean the DPF more frequently, or step up to CJ-4. (But again, there is no choice unless your 2007 engine manufacturer approves the use of the older oils.) Then you have to make a decision whether or not to stock and use two different types of oil or go with a one-oil solution and recoup the extra cost of CJ-4 with extended drain intervals or increased engine and component life.