The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.

Vermeer MTR12/MTR16 Microtrencher
January 12, 2012

The Vermeer microtrenching system consists of four main components — the cutter wheel, utility tractor, vacuum and grout mixer — creating a “train” to complete  microtrenching in one pass. Microtrenching is an installation method in which a narrow (.75 to 2.25-inch [19.1 – 57.2 mm]) and relatively shallow trench (8 to 16 inches [20.3 to 40.6 cm]) is cut, typically on one side of a roadway. Then a vacuum system connected to the cutter wheel attachment diverts and transports the dry and dusty spoil away from the worksite. Once the conduit pipe is laid, the trench is backfilled with a grout compound. The MTR12 and MTR16 microtrenching attachments offer maximum cutting depths of 12 inches (30.5 cm) and 16 inches (40.6 cm) respectively, and depth control is mechanically adjusted in 1-inch (2.5 cm) increments. The attachments are designed to work with the Vermeer RTX550 utility tractor.