//--- META DESCRIPTION FOR BOOMTRAIN---//?>
The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
Hyundai Construction’s line of Compact Radius Excavators are designed for tight, confined job sites and for maximum performance. The R27Z-9 and R35Z-9 zero tail swing models offer a tail-swing radius of 2.7 feet (775 mm) and 2.10 feet (870 mm) respectively. This gives users a choice for easy, efficient operation on sites where space is tight. The 6,350 lb (2,880 Kg) R27Z-9 is powered by a reliable 24.7 hp (18.4 kW) Mitsubishi S3L2 engine. The machine has a dig depth of 6.10 feet (2,085 mm) and bucket-digging force of 4,520 lbf (20.1 kN). The R35Z-9 zero tail swing weighs 8,050 lbs (3,650 Kg) and is powered by a 27.3 hp (20.4k) Yanmar 3TNV88, water-cooled, four-cycle engine. The R35Z-9 has a dig depth of 7.2 feet (2,190 mm) and bucket digging force 7,050 lbf (31.4 kN). You can select rubber or steel tracks on either the R27Z-9 or the R35Z-9. In the middle of the Hyundai compact radius lineup is the 13,010 lb (5,900 kg) R60CR-9 — and the 18,410 lb (8,350 kg) R80CR-9 compact radius models. The tail swing radius of the R60CR-9 is a tight 3.7 feet (1,080 mm), while the R80CR-9 is just 4.2 feet (1,280 mm). Both models are powered by the fuel-efficient Yanmar 4TNV98 diesel engine. http://www.hceamericas.com