Designed to handle severe frost and rock removal jobs, the Leading Edge Attachments, Inc.™s Multi-Ripper Bucket is an engineering breakthrough that works on the same principal as the award winning Multi-Ripper! Just like the Multi-Riper, the Multi-Ripper Bucket can be used for a wide range of tough material applications such as excavating frozen ground, coral, sandstone, limestone, shale, decomposed granite and caliche. This unique patent pending design has demonstrated that it can rip and dig faster than any other style of ripper or ripper/bucket combination!
The Multi-Ripper Bucket is similar to the LEA, Inc. 3 stage Multi-Ripper which functions similarly to that of a trencher except it uses the hydraulic excavator rolling action to rip. The staggered ripper teeth fracture the substrate in sequential order. No two ripper teeth align with each other, so that the maximum breakout force is applied sequentially to each tooth. The distance from the excavator stick pivot to the tooth tips is also shorter than the standard bucket for the machine. The shorter distance actually multiplies the tooth tip force. The rolling of the Multi-Ripper Bucket, by extending the bucket cylinder, always provides the full multiplied breakout force individually on each tooth so that the substrate is ripped out by each individual tooth lifting action. The result is a relatively flat trench bottom due to the fact that the ripper tooth tips all lie on a constant radius with a center of rotation that is close to the bucket pivot. Due to the leading edges and the back-sheets, the Multi-Ripper Bucket can also scoop material, thus eliminating the need to switch back to a bucket for clean up.
The Multi-Ripper Bucket is the absolute best and most productive ripper bucket combination available on the market! The new Multi-Ripper Bucket is available to fit any excavator or backhoe above 11,000 pounds.
Call Toll Free: 866-928-5800 Fax: 508-829-4822 email: email@example.com