Construction Equipment
Ag Equipment
Roadbuilding
Dealers
Business
Technology
Tag: pumps
Construction Equipment
Atlas Copco intros 2 high-flow dewatering pumps for construction
The new PAS 100 HFS and PAS 150 HFS high-flow pumps from Atlas Copco Power Technique are designed for construction, general dewatering and emergency applications, such as flood cleanup. Both are vacuum prime centrifugal pumps and have Tier 4 Final engines. The 4-inch PAS 100 has a 49-horsepower engine, produces up to 1,230 gallons per [âŚ]
January 8, 2020
Construction Equipment
Xylemâs new NC100S, CD100S âsmart pumpsâ can be operated remotely from anywhere
Xylem has increased the offerings of its Godwin S Series Dri-Prime dewatering pumps with the new NC100S and CD100S models. The 4-inch surface-mounted centrifugal pumps feature Xylemâs latest cloud-based Field Smart Technology, which enables remote operation and monitoring of the pumps from anywhere in the world, the company says. The technology comes standard on the [âŚ]
January 1, 2020
Construction Equipment
Adjust for speed, distance with new Blastcrete RS180 Mixer-Pump
Blastcreteâs new RS180 Mixer-Pump is designed to pump further and faster without surging. It offers variable speeds up to 18 cubic yards per hour for gypsum flooring underlayment, grouting, cellular concrete and wet shotcrete. The 2L8 rotor-stator pump allows operators to adjust material flow to the job. Tightening the pump increases line pressure for longer [âŚ]
August 7, 2019
Construction Equipment
Atlas Copco appoints new VPs, strategic manager
Atlas Copco has announced five new staff positions, including four vice presidents and a strategic development manager. Rob Johnston will serve as vice president/business line manager for the air and tools business line. He has been with the company since 2011, most recently as business line manager for the Portable Energy Division. Jim OâBrien has [âŚ]
November 2, 2017
Construction Equipment
Atlas Copco launches 30 new high-flow dewatering pumps
Atlas Copco is capitalizing on its 2016 acquisition of Varisco by adding more than 30 new high-capacity pumps. The new products include three models of centrifugal dry prime pumps that can handle flows up to 6,164 gallons per minute. The pumps come in wet and dry prime models for construction, drainage and emergency conditions. There [âŚ]
October 20, 2017
Construction Equipment
Harvey victims, responders urged to use caution when pumping out floodwaters
As water starts to recede in flood-damaged areas in the path of Hurricane Harvey, the urge to pump that water out will only grow. But Glenn Wieczorek, managing director of pump manufacturer Tsurumi America, hopes contractors and others seeking the waterâs removal from homes and buildings will follow a few precautions before cranking up the [âŚ]
September 7, 2017
Construction Equipment
BJM Pumpsâ heavy-duty submersible slurry pump features slim design for tight spaces
BJM Pumpsâ XP-KZN heavy-duty submersible explosion proof pumps feature a top discharge, slim-line design with agitator specifically designed to suspend heavy slurries such as those containing coal, ash, sand, gravel or other abrasive materials. The agitator helps to keep the solids suspended in liquid, allowing the pump to resist clogging. Along with the impeller and [âŚ]
April 30, 2015
Construction Equipment
Godwin prepares for Tier 4 Final, Dri-Prime pump fourth generation
Although its global headquarters is in Bridgeport, New Jersey, Xylem Dewatering Solutionsâ Godwin division still retains its heritage operation in Quenington, England, where several of the companyâs pump end and canopies are produced. âNinety percent of our revenue is outside of the United Kingdom,â says Jim Mowbray, managing director, in a conversation with editors last [âŚ]
May 6, 2014
Construction Equipment
Making mud flow better, Putzmeister America debuts two new concrete pumps
A number of design enhancements and improvements went into the two new concrete boom pumps shown by Putzmeister at the World of Concrete this week. The 32Z-Meter truck mounted concrete boom pump weighs 3,250 pounds less than the previous 32 meter version. This allows for increased payload for auxiliary equipment, fuel and water. The new design [âŚ]
January 23, 2014
Technology
ITT buys Godwin Pumps
ITT has purchased privately-held Godwin Pumps, which manufactures a line of automatic self-priming portable pumps. The $585 million transaction is expected to close in the third quarter of 2010. Gretchen McClain, president of ITTâs Fluid and Motion Control group, calls the acquisition âa great complement to our existing fluid technology portfolio, and is expected to [âŚ]
June 29, 2010
Roadbuilding
ITT buys Godwin Pumps
ITT has purchased privately-held Godwin Pumps, which manufactures a line of automatic self-priming portable pumps. The $585 million transaction is expected to close in the third quarter of 2010. Gretchen McClain, president of ITTâs Fluid and Motion Control group, calls the acquisition âa great complement to our existing fluid technology portfolio, and is expected to [âŚ]
June 24, 2010
Construction Equipment
Thompson Pump & Manufacturing celebrates 40 years
Thompson Pump & Manufacturing Co., Inc., a full-service manufacturer and provider of pumps, pumping equipment and engineering expertise, is celebrating its 40th year providing innovative pumps and pumping solutions. During the last 40 years Thompson Pump has grown to be a global leader in the portable pump industry and is responsible for pioneering pumps and [âŚ]
April 9, 2010
Page 1 of 2
Next Page