Construction Equipment
Ag Equipment
Roadbuilding
Dealers
Business
Technology
Tag: construction safety guides
Roadbuilding
Silica/Asphalt Milling Machine Partnership officials release 2 new silica exposure control guides
Members of the Silica/Asphalt Milling Machine Partnership recognized the culmination of the group’s 10-year effort to improve worker safety with a ceremony during the World of Asphalt in Baltimore and releases of a best practices guide and a field guide. The partnership is made up of the National Asphalt Pavement Association (NAPA), the National Institute […]
March 26, 2015
Home
Safety Step 2: Double-check equipment
If you’ll be working on around electrical circuits or parts, check to see that machinery and power tools are properly grounded and check the condition of all power cords. If you need to inspect or repair machinery, pull the plug first.  < Safety Step 1       Safety Step 3 >> […]
November 25, 2013
Home
Safety Step 1: Keep Your Distance
OSHA requires you stay at least 10 feet away from overhead power lines with up to a 50,000-volt current. For lines that exceed 50,000 volts, you’re required to add a distance of stay at least 10 feet plus 4 additional inches for each additional 10,000 volts of current above 50,000 volts.  < Back to […]
November 25, 2013
Home
Safety Step 3: Wear the right PPE
Your personal protective equipment is the last line of defense between you and any hazards you may face. Make sure your PPE is approved for the type of work you are performing, and keep it in good condition. Uncomfortable PPE or items in disrepair can distract you from the task at hand, making you more […]
November 25, 2013
Safety
3 Safety Steps for avoiding electrocution on the jobsite
Of all the causes for on-the-job construction fatalities, electrocution may seem the most avoidable. It’s merely a matter of avoiding live wires, right? However, at approximately 140 U.S. deaths annually, electrocution is the fourth leading cause of construction fatalities in the nation, making it one of OSHA’s “Fatal Four.” So, why are so many construction […]
November 25, 2013
Page 1 of 1