Other Publications

Construction Industry Poll

In the Magazine

Rent Smart: How to rent a compact excavator

June 12, 2007 |

Because they’re so handy from the beginning to the end of the job, especially considering the attachments they use, it’s not uncommon for compact excavators to rent a month at a time,” says Mike Lumbers, senior project manager, compact utility line, Ditch Witch.

Tasks assigned to these machines can include truck loading, setting pipe, precision excavating and trenching. They’re also specialty machines. For example, “contractors like to use our .89-metric-ton excavator with an integrated hammer to do interior demolition and construction,” says Mike Conley, product manager, compact hydraulic excavators, Komatsu America utility division.

Zero tail swing or not?
In a broad sense, compact excavators can be divided between those that have zero tail swing and those that don’t. And there’s also the in-the-middle-type, called minimal tail swing, where 10 percent or less of the tail goes outside the tracks. According to the 2005-2006 Equipment World Spec Guide, there are currently 46 models that have zero tail overhang.

Contractors typically use compact excavators because of work site space constraints such as narrow passageways, jobsite obstacles or the need to work close to a structure. “Zero tail swing is a logical choice when such constraints are present,” says J. J. Shields, marketing manager for compact excavators, Case Construction Equipment. “The challenges are greater when working in a confined space if you have to keep watching to make sure the excavator doesn’t clip a fence or foundation.”

But don’t become acclimated to zero tail swing rentals and fail to make adjustments when you operate a conventional machine, says Jon Kuyers, compact solutions manager, Vermeer Manufacturing. “Be aware of your surroundings and make sure you evaluate any jobsite constraints or obstacles,” he says.

These machines also come with two types of tracks: retractable or fixed. Non-fixed tracks can be retracted so the machine can travel through a 36-inch opening, then expand to 47 inches to stabilize the machine and give it more digging power. Although the vast majority of compact excavators come with rubber tracks, there are instances where a steel track might be a better choice, Lumbers says, including demolition sites with a lot of rebar or a project where you need additional tractive effort.

A control issue
Make sure you or your operators are familiar with the controls on the particular brand rented. And since the controls on these machines can be changed between SAE and ISO patterns with a turn of a valve, check which pattern has been set. “Even the smallest compact excavators have great hydraulic power and must be operated responsibly,” says Reece Norwood, brand marketing manager, New Holland Construction.

And the general warning of always being aware of your surroundings particularly comes into play with these machines since they operate in tight spaces. “Because of their size, it’s easy to forget how tall these machines can sometimes get,” Lumbers comments, “so make sure you’re out of the way of limbs, electrical lines and building overhangs.”