- Equipment World - http://www.equipmentworld.com -
PC228USLC-3 short tail swing excavator with Tier 3 Engine is specifically designed for working in congested or confined areas
Posted By admin On January 27, 2009 @ 12:00 am In Boomerang | No Comments
Rolling Meadows, IL, October 12, 2006”Komatsu America Corp. announced the PC228USLC-3 short tail swing excavator with Tier 3 engine. The PC228USLC-3 has a flywheel horsepower of 148 HP, an operating weight between 49,900 to 51,110 pounds with a bucket capacity range of 0.66 1.57 Yd3. Occupying a 180 degree swing width of 13™1 with a loaded bucket, and a large counterweight than requires no additional clearance, the PC228USLC-3 is the ideal machine for working in confined areas such as roadways, bridges, urban areas or anywhere space in limited.
The PC228USLC-3 is also equipped with the latest KomtraxTM technology, which sends machine operating information to a secure website utilizing wireless technology. Data such as operating hours, location, cautions and maintenance alerts are relayed to the web application for analysis. The Komtrax fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor, and provides a wealth of other information to drive business efficiently and productively.
Special features of the PC228USLC-3 include:
The excavator is equipped with the newly developed, powerful, low emission Komatsu SAA6D107E-1 electronically controlled common rail type engine that significantly reduces Nox emissions by 29% with an accurate multi-staged fuel injection system. The engine meets EPA Tier 3 and EU stage 3A emission regulations without sacrificing power or machine productivity.
The PC228USLC-3 is equipped with working modes designed to match engine speed, pump flow, and system pressure to specific application requirements, giving the operator flexibility to match equipment performance to the job at hand. Economy mode now features four (4) level settings, allowing the operator to achieve required production with the lowest possible fuel consumption. In the power mode the machine is set for maximum-horsepower operation. Even if the pressure varies with the pump load, the engine speed is properly controlled and the engine is always used near the rated output point. This mode is suitable for large production and heavy-load work since the engine output is fully utilized.
The lifting mode gives the operator 7% more lifting force on the boom making it ideal for situations such as lifting heavy pipe, or precise control with heavier loads. A breaker mode is now provided as an independent function allowing for maximum production and power.
Equipped with Komatsu™s exclusive EMMS (Equipment Management Monitoring System), the PC228USLC-3 was designed to reduce costly downtime. EMMS continually monitors all critical excavator systems, alerting and guiding the operator should a problem occur. By preventing a small problem from becoming a major service issue, EMMS contributes to operating cost reduction. The system also tracks the preventative maintenance schedule, providing on-board warning as required maintenance becomes due. Error codes and troubleshooting assistance is available at the EMMS display minimizing diagnosis and repair time.
Komatsu™s low-noise cab design uses a pressurized highly rigid cab and air filter to reduce noise and prevent external dust from entering the cab. The cab rests on fully-viscous damping mounts, minimizing vibration and noise from the machine body and reducing operator fatigue. An electronic engine, highly rigid cylinder block, low-noise muffler design and optimal arrangement of sound absorbing materials throughout the engine compartment further reduce dynamic noise.
Komatsu America Corp. is a U.S. subsidiary of Komatsu Ltd. which is the world™s second largest manufacturer and supplier of construction, mining and compact construction equipment. Through its distributor network, Komatsu offers a state-of-the-art parts and service program to support the equipment. Komatsu has proudly been providing high-quality reliable products for nearly a century. Visit the website at www.komatsuamerica.com for more information.
Visit our Komatsu dealer HERE.
Article printed from Equipment World: http://www.equipmentworld.com
URL to article: http://www.equipmentworld.com/pcuslc-short-tail-swing-excavator-with-tier-engine-is-specifically-designed-for-working-in-congested-or-confined-areas/
Copyright © 2012 Equipment World -- Development. All rights reserved.