- Equipment World - http://www.equipmentworld.com -
Makes Cuts That No Circular Cut-Off Saw Can Make!
Posted By Equipment World Staff On November 2, 2007 @ 12:00 am In Boomerang | No Comments
The 613GC from ICS® cuts twice the depth of an ordinary circular blade cut-off saw. Weighing only 21 pounds complete, this new saw is capable of plunge cutting to 14-inches and will cut a square opening with no over-cuts in material as thick as 10-inches. The 613GC is powered by an 80 cc, 5.7 hp, 2-cycle gas engine, with an advanced air filtration system designed for wet-cutting aggregate materials. Whether your need is for remodeling, new construction, construction repair or controlled demolition, the 613GC is designed to handle the wide range off concrete and masonry cutting requirements encountered on the job.
|Weight||21 lbs (9.5 kg)|
|Bar Length||12-inch (30 cm), 14-inch (35 cm)|
|Engine Speed||12000 ± 500 rpm, electronically|
2800-3200 rpm idle
|Horsepower||5.7 hp (4.2 kW) @ 9000 rpm|
|Engine Type||2-stroke, single-cylinder, air-cooled|
|Displacement||4.9 cu.inch (80 cc)|
|Chain Speed||5300 fpm (27 m/s), free running|
|Dimensions||18 inches (45 cm) Length|
11.5 inches (29 cm) Height
10 inches (25 cm) Width
|Water Supply||Minimum 20 psi (1.5 bar)|
|Fuel Mix Ratio||25:1 gasoline-to-oil|
|Fuel Capacity||0.23 gal (.88 liter) 15-18 minutes run time per tank|
Advantages and Uses
Article printed from Equipment World: http://www.equipmentworld.com
URL to article: http://www.equipmentworld.com/makes-cuts-that-no-circular-cutoff-saw-can-make/
Copyright © 2012 Equipment World -- Development. All rights reserved.