- Equipment World - http://www.equipmentworld.com -
Learn best practices for equipment management and maintenance in these ConExpo-Con/Agg seminars
Posted By Amy Materson On February 13, 2014 @ 8:28 am In ConExpo-Con/Agg 2014,Educational Sessions | No Comments
Telematics is the integrated use of telecommunications and informatics to control vehicles on the move. Telematics solves the difficulty of gathering common data from different machines. Learn how many OEMs are working together with AEMP to develop common data points that can be gathered from a mixed fleet using one program. Learning Objectives: 1. Learn how telematics can help fleet managers gather and maintain common data from the different vehicles in their fleet. 2. Discover how working with AEMP can help your company reap benefits with telematics technology. 3. Implement a telematics program to successfully manage your company’s fleet.
Tuesday, March 4; 8:30 a.m. – 9:30 a.m.; Speakers: OEM and fleet manager telematics experts.
Learn about the complexities of metrics and benchmarking in the diverse and complex world of equipment management where few universal definitions, norms and standards exist. Fleet activity metrics, such as deployment and utilization are discussed in detail as are input metrics (such as labor hours per operating hour) and output metrics (such as availability and reliability). Examples of each metric are presented. Learning Objectives: 1. Define and use internal benchmarks to ensure fleet management success. 2. Learn how benchmarks metrics can efficiently be grouped into three areas (I) activity metrics which measure work done and fleet activity, (ii) input metrics that measure the resources used to operate your fleet and (iii) output metrics that measure results obtained. 3. Present well-designed data graphics in a concise and easy-to-read format.
Wednesday, March 5; 8:30 a.m. – 9:30 a.m.; Speaker: Mike Vorster, president, C.E.M.P. Central
Learn how diesel engine regulations have incorporated Tier 4 engine emissions technology. Examples of project specifications requiring the use of Tier 4 equipment will be provided. Learning Objectives: 1. Incorporate Tier 4 equipment into your fleets and remain competitive. 2. Learn and understand the regulatory time frames for Tier 4 equipment. 3. Learn and understand the time frames for manufacturers to introduce Tier 4 equipment.
Wednesday, March 5; 3:00 p.m. – 4:00 p.m.; Speaker: Mike Buckantz, chief executive officer, Associates Environmental
Preventive and condition based maintenance are seen and accepted as “The right thing to do.” Few managers stop to ask “How much should I do and what should I expect?” The session seeks to answer these questions by describing preventive and condition based maintenance as two steps in a spectrum of possible actions that ranges from daily inspections, through routine maintenance, to repair and rebuild. It stresses the importance of a disciplined, systematic and thorough approach to whatever you do and presents a case study to show how the impact of different maintenance strategies can be quantified and measured. Learning Objectives: 1. Learn the importance of a disciplined, systematic and thorough approach to preventive and condition based maintenance. 2. Quantify the impact of different maintenance policies to realize maintenance as an investment rather than a cost. 3. Understand that good routine maintenance is critical to sustaining the balance between age, cost and reliability in your fleet.
Thursday, March 6; 3:00 p.m. – 4:00 p.m. Speaker: Mike Vorster
Article printed from Equipment World: http://www.equipmentworld.com
URL to article: http://www.equipmentworld.com/learn-best-practices-for-equipment-management-and-maintenance-in-these-conexpo-conagg-seminars/
URLs in this post:
 Image: http://www.equipmentworld.com/files/2014/02/conexpo-logo-2014.jpg
Copyright © 2012 Equipment World -- Development. All rights reserved.