JT8020 MACH 1DIRECTIONAL DRILLS

Featuring a six-cylinder diesel engine generating 261 hp (195 kW), the JT8020 Mach 1 has the power and torque to provide maximum fluid flow and downhole productivity. The JT8020 Mach 1″s advanced electronic system provides cruise control, automatic pipe loading, and on-board diagnostics to simplify overall operation.

KEY FEATURES, JT8020 MACH 1

  • Optional on-board crane rotates 360°, and can be used for anchoring the drilling unit, changing pipe boxes, lifting and moving downhole tools, and other routine lifting needs.

  • 200+ gpm (757 L/min) drilling fluid pump, drilling fluid lines and swivel are designed to enhance downhole performance.
  • SPECIFICATIONS, JT8020 MACH 1

    DIMENSIONS U.S. METRIC
    Overall machine length* 348 in 8.84 m
    Overall machine width* 101 in 2.57 m
    Overall machine height* 110 in 2.79 m
    Drilling unit operating mass* 43,900 lb 19 900 kg
    Entry angle* 10 ° to 15°
    Angle of approach 13°
    Angle of departure 17°
    POWER PIPE U.S. METRIC
    Length of drill pipe (nominal)* 177 in 4.5 m
    Diameter of drill pipe tool joint end* 4 in 102 mm
    Diameter of drill pipe* 3.62 in 92 mm
    Minimum bend radius 230 ft 70 m
    Weight of drill pipe* 229 lb 104 kg
    Weight of drill pipe & box (JT8020 12 pipe) 3760 lb 1710 kg
    Weight of drill pipe & extra box (JT8020 12 pipe) 3760 lb 1710 kg
    OPERATION U.S. METRIC
    Maximum spindle speed* 210 rpm
    Maximum spindle torque* 10,000 ft·lb 13 600 N·m
    Carriage thrust travel speed* 185 fpm 56 m/min
    Carriage pullback travel speed* 185 fpm 56 m/min
    Thrust force* 70,000 lb 311 kN
    Pullback force* 80,000 lb 356 kN
    Bore diameter 6 in 152 mm
    Backream diameter Soil dependent
    Ground travel speed (forward)* 3.6 mph 5.8 km/h
    Ground travel speed (reverse)* 3.6 mph 5.8 km/h
    POWER U.S. METRIC
    Engine Deutz BF6M1013 ECP
    Fuel Diesel
    Cooling medium Liquid
    Injection Direct
    Aspiration Turbocharged & charge air cooled
    Number of cylinders 6
    Displacement 436 in3 7.15 L
    Bore 4.25 in 108 mm
    Stroke 5.1 in 130 mm
    Manufacturer”s gross power rating** 261 hp 195 kW
    Rated speed 2300 rpm
    Emissions Compliance EPA Tier 3 EU Stage IIIa
    DRILLING FLUID SYSTEM (ON-BOARD) U.S. METRIC
    Maximum drilling fluid pressure* 1000 psi 69 bar
    Maximum drilling fluid flow* 230 gpm 870 L/min
    FLUID CAPACITIES U.S. METRIC
    Hydraulic reservoir 47 gal 180 L
    Fuel tank 97 gal 370 L
    BATTERY (2 USED) U.S. METRIC
    SAE Reserve capacity rating 450 min
    SAE Cold crank rating @ 0° F (-18° C) 1400 A
    Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features. *Per SAE J2022 **Per SAE J1995