- Equipment World - http://www.equipmentworld.com -

992G Wheel Loader

Posted By Equipment World Staff On November 15, 2007 @ 12:00 am In Boomerang | No Comments

Innovative performance you can feel. The 992G is a revolutionary advancement in large wheel loader design, providing a 22 metric ton (24 ton) payload for the most demanding applications.


 


 


 


 


 
















































































































































































































































































































































































































































































































































Engine

Units:  US 


Net Power


800 hp


597 kW



Engine Model


Cat® 3508B DITA EUI


Cat® 3508B DITA EUI



Gross Power


880 hp


656 kW



Net Power – Caterpillar


800 hp


597 kW



Net Power – EEC 80/1269


800 hp


597 kW



Net Power – ISO 9249


800 hp


597 kW



Net Power – SAE J1349


791 hp


590 kW



Net Power – DIN 70020


829 PS


829 PS



Gross Power – ISO 3046-2


880 hp


656 kW



Bore


6.7 in


170 mm



Stroke


7.5 in


190 mm



Displacement


2105 in3


34.5 L



Torque Rise


30 %


30 %




Operating Specifications



Operating Weight


209278 lb


94927 kg



Rated Payload


24 tons


21.8 tonnes



Articulation Angle


43 Degrees


43 Degrees




Buckets



Bucket Capacities


11.5-12.3 m3 15-16 yd3


11.5-12.3 m3 15-16 yd3




Transmission



Transmission Type


Planetary powershift


Planetary powershift



Forward 1


4.1 mph


6.6 km/h



Forward 2


7.15 mph


11.5 km/h



Forward 3


12.37 mph


19.9 km/h



Reverse 1


4.54 mph


7.3 km/h



Reverse 2


7.83 mph


12.6 km/h



Reverse 3


13.67 mph


22 km/h



Converter Drive – Forward 1


4.1 mph


6.6 km/h



Converter Drive – Forward 2


7.1 mph


11.5 km/h



Converter Drive – Forward 3


12.4 mph


19.9 km/h



Converter Drive – Reverse 1


4.5 mph


7.3 km/h



Converter Drive – Reverse 2


7.8 mph


12.6 km/h



Converter Drive – Reverse 3


13.6 mph


22 km/h



Direct Drive – Forward 1


Lock-up disabled


Lock-up disabled



Direct Drive – Forward 2


7.7 mph


12.4 km/h



Direct Drive – Forward 3


13.5 mph


21.8 km/h



Direct Drive – Reverse 1


4.8 mph


7.7 km/h



Direct Drive – Reverse 2


8.5 mph


13.6 km/h



Direct Drive – Reverse 3


14.9 mph


24 km/h




Axles



Maximum Single-Wheel Rise and Fall


24.8 in


630 mm



Front


Fixed


Fixed



Rear


Trunnion


Trunnion



Oscillation Angle


10 Degrees


10 Degrees




Hydraulic Cycle Time



Raise


9.12 Seconds


9.12 Seconds



Dump


3.26 Seconds


3.26 Seconds



Lower Float Down (Empty)


3.47 Seconds


3.47 Seconds



Total Hydraulic Cycle Time


15.85 Seconds


15.85 Seconds




Loader Hydraulic System



Relief Valve Setting


4500 psi


31000 kPa



Cylinders, Double Acting: Lift, Bore and Stroke


279.4 mm x 1173 mm 11.0 in x 46.2 in


279.4 mm x 1173 mm 11.0 in x 46.2 in



Cylinder, Double Acting: Tilt, Bore and Stroke


279.4 mm x 1816 mm 11.0 in x 71.5 in


279.4 mm x 1816 mm 11.0 in x 71.5 in



Relief Valve Setting (low idle)


363 psi


2500 kPa




Steering



Steering


Meets SAE and ISO standards.


Meets SAE and ISO standards.



Total Steering Angle


86 Degrees


86 Degrees



Minimum Turning Radius (over bucket)


430.71 in


10940 mm




Service Refill Capacities



Fuel Tank


413 gal


1562 L



Cooling System


53.89 gal


204 L



Crankcase


26.5 gal


102 L



Transmission


44.6 gal


169 L



Differentials and Final Drives – Front


91 gal


345 L



Differentials and Final Drives – rear


86 gal


326 L



Hydraulic System (factory fill)


168 gal


646 L



Hydraulic System (tank only)


84.8 gal


326 L



Hydraulic System – Steering and Engine Cooling Fan


60 gal


231 L



Hydraulic System (including tank)


170.66 gal


646 L




Brakes



Brakes


Meets SAE J1473 OCT90 and ISO 3450: 1992


Meets SAE J1473 OCT90 and ISO 3450: 1992




Cab



Sound Performance


Meets ANSI/SAE and ISO requirements


Meets ANSI/SAE and ISO requirements




Dimensions*



Height to Top of Exhaust Stacks


18.34 ft


5590 mm



Height to Top of ROPS/FOPS


18.34 ft


5590 mm



Height to Top of Hood


13.07 ft


3984 mm



Ground Clearance


2.27 ft


691 mm



Reach at Max. Lift/Dump – Std


7.81 ft


2381 mm



Overall Height Bucket Raised – Std


30.89 ft


9415 mm



Length – Rear Axle to Bumper


13.76 ft


4195 mm



Wheel Base Length


19.32 ft


5890 mm



Overall Length – Std


53.23 ft


16226 mm



Hinge Pin Height at Full Lift – Std


22.77 ft


6939 mm



Length with Bucket on Ground


613.58 in


Article printed from Equipment World: http://www.equipmentworld.com

URL to article: http://www.equipmentworld.com/g-wheel-loader/

Copyright © 2012 Equipment World -- Development. All rights reserved.