The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
Sheyenne Tooling and Manufacturing 600CT Snowblower
October 24th, 2012
Have someone from Sheyenne Tooling and Manufacturing
contact you with more information Click Here
Company: Sheyenne Tooling and Manufacturing
Sheyenne Tooling and Manufacturing has the 600CT snowblower for compact tractors, featuring a concentric-axis design, meaning the impeller and auger rotate on the same shaft to improve performance and reduce maintenance concerns. Additionally, the standard quick-attach, front-mount design of the blower allows full articulation of the loader’s arms during operation. The 600CT has a 74-inch cutting width and a 28-inch cutting height for managing tall drifts and snow piles. The 18-inch, four-blade impeller rotates the same direction as the auger to effectively direct snow into the discharge chute. To power the unit, the 600CT comes with a hydraulic pump, which installs on the tractor’s mid-mount PTO shaft and uses oil from the loader circuit of the tractor. The blower also comes with a solenoid valve for electric-over-hydraulic control of the discharge chute and deflector. Once the system is installed, an operator can remove the 600CT and switch back to the loader bucket in just a few minutes.
800-797-1883 or 701-797-2700, www.sheyennemfg.com