The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
September 4th, 2008
Have someone from Roadtec
contact you with more information Click Here
Roadtec designed the seat on its pavers to slide out to the side in a straight line instead of swinging out on an arc because paver operators must have the ability to quickly visually check the rear auger of their machine to make sure material levels are where they are supposed to be for a quality paving job. The straight sideways movement of the seat results in a position that allows the operator excellent visibility down the side of the machine and also to the rear augers. If there’s too much or too little material around the auger, problems in the paved surface will result. Paving speed, flow gate settings, and feed sensor position regulate material flow. Being able to easily see the augers allows the operator to monitor these variables and to deliver mix evenly across the augers and thus across the entire leading edge of the screed plate, which is a requirement for a segregation-free mat.