The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.

Roadtec SmoothMill
September 1, 2009


Roadtec offers enhanced and improved grade and slope control automation for its RX-500, RX-700, and RX-900 cold planers. Roadtec SmoothMill is an automation system designed solely for cold planers. The optional system features integrated connections and cabling, two dual control boxes for ground personnel, each capable of controlling both sides of the machine, and also provides the operator (driver) with a separate control box. Ease of use comes from being able to simply plug controls into sockets conveniently located on the outside of the machine, and from combining right- and left-hand side controls into one box. Reliability has been increased by routing cables through protected areas rather than having them exposed at the outside. Two dual (right and left side) control boxes are supplied, one on each side of the machine.