The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.

Quikrete High Strength Anchoring Epoxy
February 20, 2013

Quikrete High Strength Anchoring Epoxy is a high strength, dual-component adhesive perfect for heavy duty application on horizontal surfaces. The adhesive comes in a single cartridge that can be loaded into a standard caulk gun. Its non-sag, solvent-free and low odor formula offers users 15 minutes of working time and is ideal for multiple heavy duty anchoring projects, achieving up to 12,000 PSI. Quikrete High Strength Anchoring Epoxy can be used to anchor bolts, threaded rods, railings and rebar dowels into concrete and masonry. To apply, screw a static mixer nozzle onto the cartridge and place the cartridge into a caulk gun. The adhesive should be dispensed from the bottom of the hole, filling approximately 5/8” of its depth. A threaded rod or rebar should then be inserted to the bottom of the hole and turned clockwise. The adhesive can support heavy loads after curing for three hours.