The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.

Handy Hitch Mfg. Profile Packer/Roller
January 27, 2009

Handy Hitch Mfg.’s Profile Packer/Roller does not require a seperate lift assembly. This shortens the overall length by 20″. The 24″ Packer Offset and Grader Adaptor Plate is bolted into place on the main 10×6 frame. The Grader Adaptor Plate is then bolted directly to the Grader or the Ripper Bar via 2 shanks. The new design also sets a new standard for ground clearance at 18″. The new frame has three main pivot points located at the rear of the machine. Each pivot point is linked via hardened steel pins and bushings to an arm assembly that is controlled by a hydraulic cylinder and central Accumulator System for down pressure control. Each of the 3 or 4 link arms is then attached to a Walking Beam.