Equipment Index ► Pumps ►

The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.

Honda High Pressure Pumps WH15XK1C1 and WH20XK1AC1

April 14th, 2009

InfoNOW!

Have someone from American Honda Power Equipment Division
contact you with more information Click Here

Company: American Honda Power Equipment Division

High Pressure

Honda’s high pressure pumps are designed for moving clean, uncontaminated water – excluding drinking water or flammable liquids – from one place to another. Typical applications for the general purpose pump series include irrigation, flood control, light construction, fire fighting and swimming pool drainage. Thanks to the use of Honda’s quiet four-stroke engines and superior technology, these pumps boast incredibly low decibel levels.

The WH15 and WH20 model pumps offer high pressure with a lower flow. The best application for these water pumps is where higher pressure is required, such as a sprinkler, irrigation systems or use with hoses and nozzles.

Specifications

Model	WH15	WH20
Engine-easy start OHV commercial engine	GX120 (118cc)	GX160 (163 cc)
Compression Ratio	8.5:1	8.5:1
Pump type	High Pressure centrifugal self priming	High Pressure centrifugal self priming
Volute	Rigid Mounted Cast Iron	Rigid Mounted Cast Iron
Impeller	Cast Iron	Cast Iron
Mechanical Seal	Carbon/Ceramic	Carbon/Ceramic
Priming time	40 sec. at 16.4 ft.	60 sec. at 16.4 ft.
Drive System	Direct	Direct
Discharge capacity	115 gals./min	134 gals./min
Suction port diameter	1.5” NPT	2.0” NPT
Discharge port diameter	1.5” NPT	2.0” NPT
Total Head Lift	127 ft.	141 ft.
Suction Head Lift	26 ft.	26 ft.
Maximum pressure	55 psi	61 psi
Dry weight	48.5 lbs.	51.8 lbs.