The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
Hilti HIT-HY 200 Adhesive Anchor System eliminates the factor of inadequately cleaning holes during installation of conventional adhesive anchor systems, which can reduce their performance significantly. Hilti Safe Set Technology eliminates this factor almost entirely and improves reliability because no manual hole cleaning is required to obtain optimum performance. For holes that clean themselves use the new Hilti TE-CD and TE-YD Hollow Drill Bits in conjunction with the Hilti VC 20/40 vacuum. Dust is removed by the Hilti VC 20/40 Vacuum System while drilling is in progress for faster drilling and a virtually dustless working environment. The new Hilti HIT-Z, zero cleaning rod with its cone shaped helix works as a torque-controlled anchor. This means that because of their shape, HIT-Z Anchor Rods, when used with HIT-HY 200, the unique shape of the HIT-Z Anchor Rod allows it to be installed in a standard (hammer drilled, dry or water saturated concrete, above 41°F/5°C) uncleaned hole.