The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
General Equipment Company DIG-R-TACH® Series
December 11th, 2007
Have someone from General Equipment Company
contact you with more information Click Here
Company: General Equipment Company
For greater jobsite versatility, General Equipment Company™s DIG-R-TACH® line allows for use with both small and large hydraulic systems. Ideal for skid steer loaders, small excavators, knuckleboom cranes and small backhoes, the 671 DIG-R-TACH® Series 16 earth drilling attachment is intended for smaller hydraulic systems, whereas the Series 24 is designed for larger hydraulic systems found with backhoes and excavators.
Featuring a two-speed chain/sprocket drive and a 5 to 20 GPM hydraulic flow range, the Series 16 balances smaller flow volumes in proportion to auger diameters. The result is a cleaner hole with less loose soil and debris. For higher capacity drilling, the Series 24 operates in a 15 to 25 GPM hydraulic flow range and delivers a maximum drilling torque of 2,018 foot-pounds at 2,500 PSI.
General Equipment Company™s 671 DIG-R-TACH series utilizes a drilling industry standard two-inch hexagon auger drive system. This design eliminates excessive auger driveshaft wear. A complete line of earth augers up to 36 inches in diameter is available with Pengo®-type, cast-steel boring heads and forged teeth for maximum digging performance. For additional drilling depth, full-flighted auger extensions can be added.
For those that prefer a round auger drive system, the 753 DIG-R-TACH series offers a 2 9/16-inch auger connection. Installation of all DIG-R-TACH models is simple with a dipper-stick mounting bracket.
In business for more than 50 years, General Equipment Company is a family-owned manufacturer of earth augers, ventilation blowers, asphalt cutters and surface preparation equipment. For more information, contact General Equipment Company, 620 Alexander Drive S.W., Owatonna, MN 55060, call 507-451-5510 or 800-533-0524, fax 507-451-5511 or 877-344-4375(DIGGER5), or visit the Web site at www.generalequip.com.