The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
The FFC Cold Planer by Paladin Construction Group attaches to skid steer loaders to mill asphalt and concrete surfaces. It can mill down frost heaves, concrete and asphalt joints and full-depth utility cuts. The FFC Cold Planer uses a “V” shaped pick pattern on the drum, where the teeth are evenly spread for a smooth, balanced operation. Four teeth are mounted on both outside drum edges to accommodate the highest wear areas. The “V” shaped pattern helps carry material over the drum and behind the planer to clear the working area of milled material and reduce re-milling of material. Minimizing re-milling reduces horsepower requirements and maximizes the performance of the skid steer and planer.