The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
E-Z Drill offers the Model 20 UTL vertical drill tailored to gas utility companies. The Model 20 UTL saves valuable time and money by allowing companies to pinpoint the site of a gas leak without tearing out a significant stretch of roadway. By using the Model 20 UTL, utility companies can drill through the road surface in periodic intervals to check for gas. This enables workers to narrow the potential leak area to a stretch between holes that would need to be removed for repair work, rather than destroying a much longer length of road. While specialized for the gas industry, the Model 20 UTL can handle virtually any type of vertical drilling application. The standard 18-inch drill depth can be significantly modified based on needs, with depths customized to several feet deep. Drill bit diameter ranges from 5/8 inch to 2-1/2 inches. A minimum of 100 cfm compressed air is required for operating the drill.