The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
Increased horsepower, fuel efficiency and reliability are just a few of the enhancements to accompany interim Tier 4 (iT4) compliance on the Doosan DL420 wheel loader. This 5.5-cubic-yard wheel loader boasts a breakout force of 47,210 pounds, a full-turn tipping capacity of 35,310 pounds and a rugged design built for a variety of material handling applications — such as quarries, mines, road work and site development. The DL420 offers operators the ability to set upper and lower limits for both the lift arm and bucket stop positions from inside the cab. This improves cycle times in digging and loading applications, while providing improved control of the lift arm and bucket positions. The new automatic reversing cooling fan can be set to run in reverse to assist in keeping the cooling system clean. The DL420 horsepower has been increased to 354 with a 6-cylinder diesel engine that has been optimized for use with selective catalyst reduction (SCR) and diesel exhaust fluid (DEF) to comply with iT4 emission regulations. www.doosanequipment.com.