The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.

Roadtec RX-400 Cold Planer

February 1st, 2008

InfoNOW!

Have someone from Roadtec Inc. 
contact you with more information Click Here

Company: Roadtec Inc.

The Roadtec RX-400’s  (1.20m) cold planer design allows contractor to cut as narrow as 26 inches (66 cm) with improved evacuation of material from the cutter housing. Material evacuation is efficient enough to allow cutting depth up to 12.5 inches (32 cm), even in clog-prone, loose material. The RX-400 conveyor and cutter housing design allows the 26 (66 cm) wide drum section visibility of the conveyor for better material flow. The unique conveyor and cutter housing design of the RX-400 solves the significant tooth and tooth holder wear problem often encountered with other designs. These problems result from poor material evacuation in the cutter housing and the fact that too much milled up material gets churned in the housing, wearing out components.

 

 

 

 

 

 

advertisement
advertisement
advertisement
advertisement