Equipment Index ► Attachments ►

The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.

CASE Stump Grinders

December 13th, 2007

InfoNOW!

Have someone from Case Construction
contact you with more information Click Here

Company: Case Construction

CASE Stump Grinders offer the following advantages:

– Models available for standard flow and high flow skid steers.

– Grinds stumps up to 12 inches below ground level.

– 60 degree range of motion covers 45 inches in a single sweep.

– Chips thrown away from loader protects operator.

Specifications:

Model	CG40	CG60
Overall length	64.1 inches (1.63m)	64.1 inches (1.63m)
Telescopic extension	7 inches (178mm)	7 inches (178mm)
Horsepower delivered	To 40 HP (29.8 kW)	To 60 HP (44.7 kW)
Cutting height above ground	21 inches (533 mm)	21 inches (533 mm)
Cutting depth below ground	16 inches (406 mm)	16 inches (406 mm)
Cutting wheel width	3.25 inches (83 mm)	3.25 inches (83 mm)
Cutting width	60 inches (1.52 m)	60 inches (1.52 m)
Swing range	140°	140°
Type of teeth	0.5 inch (12.7 mm) slanted, carbide tip	0.5 inch (12.7 mm) slanted, carbide tip
Number of teeth	32	32
Wheel diameter	18 inches (457 mm)	18 inches (457 mm)
Wheel speed (approx.)	900 RPM	900 RPM
Weight	775 lb (352 kg)	840 lb (381 kg)
Driveline	High-torque gerotor motor	Planetary/piston
Minimum required flow	25 GPM (91 L/min)	30 GPM (98 L/min)
Maximum flow	30 GPM (98 L/min)	46 GPM (174 L/min)
Minimum pressure required	2000 PSI (138 BAR)	2000 PSI (138 BAR)
Maximum pressure	3000 PSI (207 BAR)	5000 PSI (345 BAR)