The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
The 5710C is Peterson’s latest generation of high production track grinders. Powered by the Caterpillar C27 or C32 engine at 1050 horsepower, this grinder provides the highest power to weight ratio of any Peterson grinder. At approximately 83,000 pounds (37650 kg) the 5710C was designed for operations requiring high production and frequent moves between jobs. With a feed opening of 60 x 44 in. (1524 x 1118 mm) combined with Peterson™s high lift feed roll, the 5710C can readily reduce a wide range of material including stumps.The 5710C utilizes Peterson’s new generation of Impact Release System that can be set in the detent mode to provide consistent product sizing or switched to the floating anvil mode for a primary reduction where accurate sizing is less critical. The floating anvil mode provides a high production primary reduction with more protection from contaminated feedstocks and reduced fuel consumption.