The appearance of advertisements and product information on this site does not constitute an endorsement by Equipment World Magazine, and Equipment World Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
Breaker Technology’s Mobile Rock Breakers performance is achieved with the four hydraulic stabilizers, capable of leveling the machine on any ground condition. When supported on the four stabilizers the full weight of the machine is available for raking and breaking operations independent of ground conditions. The stabilizers also eliminate the osciliation of the engine and axle for excellent machine stability during boom and breaker operation. Normal operation of the Rockbreaker imposes side and torosional loading of the boom assembly when the machine is used to rake and manipulate oversize. The Breaker Boom has been specifically designed with an integral sub-frame to provide additional rigidity and strength to the base carrier frame. Boom sections are fabricated from high strength carbon steel with reinforced ends. Massive swing post is mounted on self-aligning bushings. Pivot pins are oversize alloy steel with replaceable hardened steel bushings.