Emergency Clean-up of U.S. 64 Rockslide begins; highway closed for at least 8 weeks
| November 16, 2009 |
Work is now underway to remove a major rockslide along U.S. Highway 64 in Polk County, Tenn., the Tennessee Department of Transportation (TDOT) has announced.
The agency has awarded a $2.1 million emergency repair contract to Sevierville, Tenn.-based based Charles Blalock and Sons, Inc.
The rockslide buried portions of U.S. Highway 64 at about 1 p.m. CT Nov. 10, 2009, closing the major east-west corridor through Southeast Tennessee just east of Chattanooga. TDOT originally estimated at least three weeks for clean-up, but after a closer look at the slide area the removal process will likely take at least eight weeks, according to a written statement from the agency.
“We know the closure of this roadway is a major inconvenience to the many motorists who travel U.S. 64 between Cleveland and Ducktown each day,” said TDOT Commissioner Gerald Nicely in the written statement. “We appreciate your patience while the work is completed. TDOT will work very closely with the contractor and the community to get this roadway back open as soon as possible.”
Before any material can be removed from the site crews with Charles Blalock & Sons, Inc. will first work to stabilize the slope. Workers will immediately begin scaling and trimming the rock along the face of the mountain. Crews will remove unstable material from the top of the mountainside and will drive large 40-foot long rock anchors to help secure other material along the slope.
Once the rock along the face of the mountainside has been stabilized, crews will begin removing the large boulders and other slide material located at the bottom of the mountain. After all slide material has been removed, the contractor will repair the damaged roadbed on U.S. 64 and TDOT crews will repave the roadway and reopen it to traffic.
“We estimate that some 30,000 cubic yards of rock and other debris will need to be removed from the site, which is approximately 3,000 dump truckloads of material,” said TDOT Chief Engineer Paul Degges in a press release issued Nov. 16. “This is dangerous work that requires a highly skilled contractor. Our geotechnical engineers will be working closely with Blalock throughout the project to ensure the slide removal is completed safely and as quickly as possible.”
From our partners
Thanks to Eaton’s UltraShift® PLUS VCS Transmissions, Let It Snow…Let It Snow…Let It Snow “I had concerns before we even…