Trailers

FIVE-POSITION DOOR

Trail King’s Advantage Plus! Series of hydraulic detachable gooseneck trailers features a five-position gooseneck door adjustment that allows for an 8-inch range of king pin height settings.

• Has a covered knuckle trough in the rear deck

• Includes 10-inch I-beam cross members with 4-inch stub cross members for 12-inch centers in the outer bays

• LED lights and a sealed plug-and-play electrical system comes standard.

Visit EquipmentWorld.com/info

HYDRAULIC RAMPS

Trailboss’s line of Paver Special trailers come in a 25-, 35- and 50-ton low boy and a 20-ton tag-a-long.

• Custom bed lengths are available with a 6-foot dove tail and 11-foot hydraulically operated folding ramps

• 20-ton tag-a-long has 3-foot-wide ramps

• Hydraulic ramps have a 9 1/2-degree load angle.

Visit EquipmentWorld.com/info

SELF LOAD

Roose Manufacturing’s RR-335 three-reel, self-load trailer carries reels up to 3,500 pounds with 125-inch diameters.

• Engine-powered hydraulic pump raises the reels

• Swing open rear gate and roll or back reels in

• Optional tension brake available.

Visit EquipmentWorld.com/info

GREASE SYSTEM

The Landoll 400 Series traveling axle trailers were redesigned with additional frame strength, adding 5 tons of capacity.

• Designed with centralized-grease system

• Model 440 has a frame rating of 40 tons

• Triple-axle Model 455 has a 55-ton capacity.

Visit EquipmentWorld.com/info

HYDRAULIC LINES

The Clement SideStar2 side-dump trailer has hydraulic lines routed through the frame’s cross members.

• Chassis is 39 feet long with a 34-foot inside body length

• Frame design includes structure for mounting push-block or a pintle hook

• Has a two-speed suspension.

Visit EquipmentWorld.com/info

TWO-LEGGED PADDLE

Rogers’ gooseneck jack paddle is installed on the bottom of the gooseneck to eliminate manual blocking of the trailer frame.

• Hydraulic cylinder pushes the two-legged paddle onto the trailer frame to support the detached gooseneck

• Standard on the Rogers’ CobraNeck detachable gooseneck

• Requires little to no tractor modification.

Visit EquipmentWorld.com/info

AUTOMATIC AIR

Air-Tow trailer decks remain level as they hydraulically lower, in less than 30 seconds, to the ground for loading.

• Features a fully self-contained, automatic air suspension system that adjusts for the loaded weight

• Tandem axle trailer with 16-inch wheels and electric brakes

• Carry capacity of 10,000 pounds.

Visit EquipmentWorld.com/info

SLOPED NECK

Tow equipment with Felling Trailers’ FT-80-3 tilt-slide axle, which runs on two “V” rollers and six flat rollers.

• Available in three load capacities and has a 6- to 7-degree load angle

• Has a sloped neck approach

• Standard deck is 102 inches wide.

Visit EquipmentWorld.com/info

COMMON FRAME

Towmaster’s T-Series and TC-series drop-deck trailers are built on a common frame where a base and full-featured model can be manufactured.

• Includes a six-position integrated hitch plate

• Has 3-inch, 80,000 psi junior I-beam crossmembers

• Features heavy-duty, one-piece formed fenders with back panel.

Visit EquipmentWorld.com/info

ROUND TUB

SmithCo’s Model SX2-4034 side-dump trailer has a true round, one-piece tub floor, spherical bearing-type hinges and polyurethane paint.

• Frame is 39 feet 5 inches long

• Has high-clearance, two-speed, non-load-bearing landing gear

• Tub is 34 feet long and 102 inches wide.

Visit EquipmentWorld.com/info

HEAVY HAULING

Haul multiple pieces of equipment with TrailMax’s hydraulic tail-heavy equipment trailer.

• Features high-tensile steel construction with 8-inch cross members on 12-inch centers

• FWTRD-100-HT model has a 100,000-pound distributed capacity and an 70,000-pound concentrated capacity

• Transition ramp has an 11-degree load angle.

Visit EquipmentWorld.com/info

LOCKABLE STORAGE

Fontaine’s Magnitude 35 heavy-haul trailer is equipped with a 24-foot clear deck length and a loaded deck height of 20 inches, with 6 inches of ground clearance.

• Bogie can be ordered with an optional

beavertail and spring-assisted rear ramps

• Built-in storage compartment has a lockable cover

• Can connect to the trailer on uneven ground.

Visit EquipmentWorld.com/info

HINGED RAMPS

Jet’s dropdeck trailer with a beavertail has main beams with the camber automatically precut into the web to reduce stress. Options include:

• Spring-assist hinged ramps

• Manual raise and lower valve

• Dual tire-equalization system.

Visit EquipmentWorld.com/info

MECHANICAL, REMOTE

Talbert Manufacturing’s 75-ton double Schnabel trailer features a 13-axle hauling configuration for either an 80-meter wind tower base or a wind tower mid-section.

• Available in single and multiple combinations for

wind towers

• Equipped with both mechanical and remote rear

steer capability

• Interface area is covered with an ultra-high molecular weight plastic (UHMW).

Visit EquipmentWorld.com/info

STANDARD, EXTREME

The Transcraft DTL-2100 drop-deck platform trailers are shot-blasted before assembly and then primed with a zinc-rich epoxy.

• Standard Duty has a base weight of 11,147 pounds

• Beam rating of 60,000 pounds in 10 feet

• Extreme Duty model, DTL-3000, is available.

Visit EquipmentWorld.com/info

STEEL FRAME

The Trail-Eze TE70XT is available in either a standard 15-degree load angle or the 10-degree load-angle tail.

• No moving axles

• Frame is hi-tensile steel

• Axles have a 22,500-pound capacity with oil seal hubs.

Visit EquipmentWorld.com/info

Tie-down Tips

Follow these tie-down tips and be confident in securing your load.

• The load should be distributed to balance equally on all axles and tires. When securing the load, chains should pull either in or out and never the same direction. Always use the designated D-rings or tie-down loops. When using stake pockets, drop the hook and chain through the pocket and come back up and hook on the top side. Never use a fender or frame lip, as the tie-downs could shift and the structure may not support the load.

• Inspect the chains and binders for wear, and never use a chain that has been welded or has a quick-link; these are weak points. Also, make sure the chain is rated for the capacity you are hauling.

• After the first 100 miles, check the load for shifting, loose tie-downs or chains and tire pressure on the machine you are hauling. If the tire pressure is low, bouncing could loosen the tie-down chains or straps. Check the load every time you stop.

Source: Towmaster

Flip, switch, sensor shut-off

Walk-behind power trowels are basically simple machines consisting of a handle, engine, ring guard, gearbox and lower-blade unit. However, it’s important to never overlook proper operation of critical safety features, especially the emergency engine shut-off function. Most manufacturers use a centrifugal flip switch or hold-to-run switch to reduce uncontrolled trowel runaway and bring the machine to a stop. These switches can wear over time and require occasional maintenance. A gyroscopic sensor, like in Wacker Neuson’s 36- and 48-inch walk-behind trowels, senses when the operator releases the handle and shuts down the engine, which engages a brake mechanism internal to the gearbox. Whatever type safety system you use, make sure to test its function before operations.

SANDCAST HEAD

For wet screeding and form to form, Lindley’s Vibra Strike II

F4 style 2-in-1 floats range from 4 to 16 feet.

• Weighs 36 pounds and has a Honda GX35 four-stroke engine

• Frame and vibrating head are composed of sandcast, heat-treated magnesium

• Has two hardened steel clamp bars and four socket head cap screw with saddle plates.

Visit EquipmentWorld.com/info

GAS POWER

Edco’s power trowels have been redesigned to create high-tolerance concrete floors.

• Available in 36- and 46-inch sizes

• Come standard with 5.5- or 9-horsepower gasoline engines

• Include handlebar, lifting bail, precision-engineered gearboxes and safety rings.

Visit EquipmentWorld.com/info

THREADED AXLE

The Lura Lightning Strike roller screed pours flatwork projects from sidewalks and grain bins to foundation pours.

• Features a threaded axle system

• Available in sizes from 2 to 20 feet long

• Couple screeds together for customized pour.

Visit EquipmentWorld.com/info

REVERSIBLE TUBES

Metal Forms’ Speed Screed Cruiser truss screed has reversible, aluminum-finishing tubes.

• Uses a self-contained power source

• Has variable width up to 65 feet

• Travels forward by either hand or hydraulic winches.

Visit EquipmentWorld.com/info

OPPOSITE SPIN

The Spin Screed, powered by an electric head, spins the opposite direction it is being advanced.

• Uses a 22-foot-long aluminum pipe

• Can be used on stiff, low-slump concrete with a 3-inch slump

• Leaves aggregate matrix immediately below the surface.

Visit EquipmentWorld.com/inf

FOUR-BLADE ROTORS

Allen Engineering’s MP 215, a redesign of the MP 205 mechanical drive riding trowel, is equipped with a torque converter clutch.

• Features manual steering and blade pitch controls

• Uses two 36-inch-diameter, four-blade, non-overlapping rotors

• Has variable rotor speeds up to 145 rpm.

Visit EquipmentWorld.com/inf

TWO-MODE STEERING

Wacker Neuson’s CRT 60-66K combines a hydraulic drive unit with a two-mode electro-hydraulic steering system, engine power regulation system and a built-in hydraulic wheel kit.

• Steering Mode 1 reduces the effects of exaggerated joystick movement, and Mode 2 is for more delicate joystick movement

• Features electronic cruise control and structural forklift pockets

• Powered by a 66-horsepower Kubota turbo diesel engine.

Visit EquipmentWorld.com/info

Field Service Trucks

Selecting a service crane

To pick the right service crane, start by asking yourself these questions: How much weight do I need to lift and at what distance? How often will the crane be used?

Capacity needs and the duty cycle should govern your crane selection.

Electric telescopic cranes

If your lifting needs are light and your duty cycle is intermittent, an electric telescopic crane could be the best option. Electric cranes typically range in capacity from 2,000 to 6,000 pounds and offer a lower-cost alternative. However, a hydraulic crane will typically be necessary to meet lifting needs greater than 6,000 pounds because the system cannot handle the electrical load requirements.

Hydraulic telescopic cranes

If the crane will be used regularly, a hydraulic telescopic crane is the right solution. Body-mounted hydraulic telescopic cranes offer a broad range of lift and reach capabilities to meet most field-service needs. Telescopic cranes for mechanics trucks are available with maximum lifting capacities ranging from 2,000 to 14,000 pounds.

Source: Iowa Mold Tooling (IMT)

TRANSFER LIFT

Knapheide’s mechanics trucks range from light (KMT-1) to medium (KMT-2) to heavy duty and severe applications (KMT-3).

• Crane body has torque-isolator crane support system that transfers lift into the full-length torsion box subframe, instead of side compartments

• Has hydraulic compressor with roller fairlead, FLR system and underbody air tank

• Body lengths available in 11, 13 or 14 feet.

Visit EquipmentWorld.com/info

LOW PROFILE

VMAC’s Underhood kit for the Class 4/5 International Terrastar has a VR70 air compressor system.

• Delivers 70 cubic feet per minute and up to 175 psi

• VR70 weighs 136 pounds

• Includes a low-profile, modulating high-flow inlet valve with air filter.

Visit EquipmentWorld.com/info

STEEL DESIGN

Ranging from a 16,000- to 70,000-foot-pound capacity, the Auto Crane Titan mechanics/work ready truck has double-paneled, galvanneal doors with internal stainless steel hinges.

• Made with heavy-duty steel using a single-piece, side-pack design with laser-cut door openings and radius corners

• Has a three-point latching system and adjustable gas shock door closers

• Bed is 12-gauge tread plate and includes six heavy-duty tie downs.

Visit EquipmentWorld.com/info

NO SWITCHING

The Miller Electric EnPak hydraulic tool control (HTC) allows simultaneous use of a truck’s hydraulic crane and 5 or 8 gpm hydraulic tools without switching circuits.

• Has a 27-horsepower Kubota diesel engine

• HTC matches with auto start/stop feature and EnPower technology

• Accommodates 5, 8 or 10 gpm tools or two 5 gpm tools.

Visit EquipmentWorld.com/info

STORAGE CABINETS

The Service Trucks International 2352 Eagle Pro service body has 185 cubic feet of storage capacity.

• Features 23-inch-deep by 52-inch-tall cabinets

• Body has a 40,000-foot-pound crane rating and is available with manual or hydraulic outrigger packages

• Built to fit 16,000 to 19,500 GVW cab chassis.

Visit EquipmentWorld.com/info

NON-LUBE BEARINGS

The Utility Truck Equipment Manufacturing (UTEM) Skytel UTLI 41A/46A has a 540-degree boom rotation with an hourglass worm gear drive.

• Has a non-tracking, 30-inch insulation gap

• Features non-lube bearings at all points of boom movement

• Outer boom is high-strength steel, and inner boom is ovencured, epoxy-resin fiberglass.

Visit EquipmentWorld.com/info

HEXAGONAL BOOM

The Stellar Industries Model 7621 44,000 foot-pound telescopic service crane reaches 21 feet using all hydraulically operated extensions.

• Lifts up to 7,500 pounds at 5 feet

• Designed with a hexagonal boom shape

• Uses a planetary winch system with a hydraulic/mechanical brake system for a 60-foot-per-minute winch speed.

Visit EquipmentWorld.com/info

E-COAT BODY

Omaha Standard Palfinger’s mechanics bodies are totally immersed in electrocoat epoxy paint, and the doors are e-coated before being attached to the body.

• Hybrid substructure’s design transfers crane loads directly to the outriggers and chassis

• Double-panel doors have full length and oversized hinges

• Divider trays and shelves are constructed from 16-gauge, bight-spangled galvanized steel.

Visit EquipmentWorld.com/info

PRESSURIZED COMPARTMENTS

Teamco’s 14-foot heavy-duty mechanics truck is built completely of 10-gauge galvanneal.

• Compartments are pressurized and 60 inches high and 24 inches deep

• Has a 72,000 foot-pound crane tower

• Options include hydraulic compressors, welders and generators.

Visit EquipmentWorld.com/info

PROTECTED COMPARTMENTS

Warner Bodies’ trucks are composed of A60 galvanneal steel, smooth aluminum and stainless steel materials.

• Have double-panel, 18-gauge doors

• Use automotive, bulb-style, clip-on rubber insulation backed up with a built-in rain gutter for compartments

• Hinging system features full-length, 5/16-inch stainless-steel hinge rods with stainless-steel hinge blocks.

Visit EquipmentWorld.com/info

MOUNTED STABILITY

The Iowa Mold Tooling (IMT) Dominator III truck body has a stabilizer mounted at the right front of the body that extends out and down.

• Uses high-intensity LED compartment lighting

• Features a multiplex electrical system with programmable logic for increased reliability

• Designed to feature the 12,000 model telescopic crane.

Visit EquipmentWorld.com/info

Selection Questions

Most diesel-driven, portable light towers have the same basic components – a diesel engine and generator in a trailer-mounted enclosure, a winch-operated mast and floodlights. Ask these questions on your next job to narrow down your selection:

How much light is needed? Know the size of the area needing illumination, whether light needs to be constant and how bright it should be. Experts at your local dealership or rental store can then determine the recommended number of foot-candles for the application based on standards from the Illuminating Engineering Society of North America – and ultimately how many light towers are required.

Does the job require light and power? If yes, choose a light tower that provides both.

How long will you need light? Fuel capacity should be a key factor in selection. Large, efficient fuel tanks translate into longer run time. Some light towers offer 52 or more hours of light. Depending on site conditions, an optional auto start/stop feature provides consistent and automatic illumination run time.

Source: Doosan Portable Power

VERTICAL OR TRADITIONAL

Available in both vertical and traditional lay-down tower models, Allmand’s Night-Lite Pro II has molded, poly “gull-wing” style doors.

• Plug-in light ballast assemblies are fully accessible with the doors open

• Features a four-point stabilizer system with two sliding side outriggers with swivel screw jacks

• Lay-down models have a self-locking, spring-loaded tower latch.

Visit EquipmentWorld.com/info

MULTI-DIRECTIONAL

Air System International’s Mini-Cube has a dust-tight, 800-lumen, LED head that is multi-directional on an 8-foot retractable aluminum pole.

• Provides more than 30 hours of runtime between charges

• Features a push-to-test volt meter on front panel

• Has a 12-volt port to charge the external battery.

Visit EquipmentWorld.com/info

BATTERY POWER

Terex’s battery-powered LED light towers, the AL4L and AL5L, provide up to 10 hours of runtime.

• 30-foot extended height

• AL4L is 67 inches and the AL5L is 69 inches tall when stowed

• AL5L has an 8-kilowatt generator for charging on-board batteries.

Visit EquipmentWorld.com/info

REGULATE VOLTAGE

The Subaru SGX5000 generator has a 9.5-horsepower EX30 engine and features an automatic voltage regulator system.

• Delivers a maximum output of 4,900 watts

• Fuel tank holds 7 gallons

• Has a continuous run time of 9.4 hours at the rated load.

Visit EquipmentWorld.com/info

GAS OR DIESEL

Equipped with a two-generator system, Vanair’s Air N Arc 300 power system can be mounted on a side-pack or behind the cab.

• Control panel can be remotely mounted in a side compartment

• Available in gas and diesel versions

• Combines a 40-cubic-feet-per-minute rotary screw compressor and 7-kilowatt generator.

Visit EquipmentWorld.com/info

POWER, LIGHT

The Doosan Infracore Portable Power L20, a combination light tower and mobile generator, powers a jobsite while providing up to 16 kilowatts of energy for other tools.

• 32-horsepower Mitsubishi diesel engine and 20-kilowatt generator

• Has four 1,000-watt, metal halide lamps

• Telescoping mast rotates 360 degrees and extends from 12 to 30 feet.

Visit EquipmentWorld.com/info

AUTOMATIC TENSIONING

Kaeser Compressors’ 8 KVA generator option for their Mobilair compressor line is available in their M64 and M100 portable units.

• Has two 115-volt and two 230-volt, single-phase, fused outlets

• Features an automatic V-belt tensioning device

• Includes a command-mode switch.

Visit EquipmentWorld.com/info

ENGINE PROTECTION

Winco’s WL18000VE portable generator has 15 kilowatts of continuous output and runs up to 10.5 hours.

• 31-horsepower Briggs & Stratton Vanguard valve engine with electric start

• Low-oil protection automatically stops engine if crankcase oil is low

• Includes a four-wheel, all-terrain dolly and lifting eye.

Visit EquipmentWorld.com/info

HALIDE LAMPS

The Chicago Pneumatic CPLT light tower features four metal, halide lamps of 1,000 watts each.

• Weighs 1,800 pounds and collapses to 182-by-48-by-66 inches for transport

• Lamps are powered by a Kohler LDW1003 three-cylinder, four-cycle, liquid-cooled, Tier 4A diesel engine

• Mast extends vertically up to 31 feet and can be rotated 360 degrees.

Visit EquipmentWorld.com/info

OPEN FRAME

The Yanmar diesel-driven YDG Series – YDG2700, YDG3700 and YDG5500 – have a maximum engine speed of 3,600 rpm.

• Operate at a decibel rating of 92, 93 and 96, respectively

• Feature and open-frame structure

• Weigh 141, 181 or 243 pounds.

Visit EquipmentWorld.com/info

POWER RANGE

Baldor Electric produces generators from 1 to 2,000 kilowatts that meet NEMA, NFPA110, CSA and UL standards.

• Offers industrial, portable generators from 3 to 11 kilowatts

• Mobile light towers provide light coverage for five to seven years

• Towables range from 25 to 500 volt-amperes.

Visit EquipmentWorld.com/info

VOLTAGE SWITCH

Magnum Products’ MMG 175 Tier 4 Interim generator provides up to 153-kilowatts power output and more than 24 hours of run time at a full load.

• Powered by a John Deere PowerTech PVX6068H engine

• Has a lockable, three-position, voltage-selector switch

• Features remote start/stop capabilities.

Visit EquipmentWorld.com/info

QUIET POWER

The Atlas Copco QAS 600 generator operates at 77 decibels at 60 hertz, making it efficient for noise-sensitive areas.

• Rated at 575 volt-amperes at 60 hertz

• Powered by a Volvo TAD 1641 GE diesel engine that drives a Leroy Somer alternator

• Housed in zinc-plated steel with a powder-coat finish.

Visit EquipmentWorld.com/info

Lauren Heartsill Dowdle

REMOTE OPERATED

The CBI Magnum Force Disc Chipper 754 uses a four-knife, 75-inch disc chipper and has a 26-inch feed opening.

• Chip discharge chute is remote operated, camera monitored and folds hydraulically for transport

• Trash separator and bark pusher discharge on the opposite side of the chip discharge

• Chip sizes from 3/8 inch to 1 inch.

Visit EquipmentWorld.com/info

HYDRAULIC HEAD

The Toro STX-26 stump grinder has two controls that operate all traction and grinder functions, including traction, sweeping, lifting, lowering and head engagement.

• Offset grinder head has a 47-inch arc

• Grinder is 78 inches long and fits through a 36-inch gate

• Features a hydraulically driven head.

Visit EquipmentWorld.com/info

Pay attention to teeth and blade wear

Site prep and brush clearing can be tough work, so pay particular attention to the working areas of these machines.

Stump grinders/forestry cutters

Be mindful of what’s on the ground. Rocks, rebar and steel can destroy teeth, so always make sure the carbide teeth are intact before, during and after a task. If the teeth are shorn off and shank holder material begins to wear, it can mean a costly repair.

Flail cutters

The design of a flail cutter includes a steel hammer tooth that sharpens itself as it cuts material. Rocks and other hard materials can put dings in the steel, so grinding that area down will ensure the life of the tooth.

Rotary cutters

A rotary cutter consists of two large cutting blades that provide bidirectional cutter rotation. To change the direction, simply switch the hydraulic hoses at the drive motor; doing so on a periodic basis will increase overall blade life. Check blades regularly to see if they need sharpening.

Source: Bobcat

DUAL MOTORS

The CW Mill Equipment HogZilla grinder uses dual 400-horsepower electric motors to drive the 46-inch diameter, 12-pin hammermill.

• Tub floor is built with 3/4-inch abrasive resistant steel

• Belly conveyor is 72 inches wide

• Features a hammermill with an 8 3/4-inch main shaft.

Visit EquipmentWorld.com/info

PREPARES SITE

The Fecon FTX600 handles pipeline and power line right-of-way clearing, large-scale vegetation management and site preparation.

• Delivers 210 gallons of hydraulic flow to the variable speed mulching head

• Has 5.9 pounds per square inch of ground pressure

• Cuts 98 inches high and 32 inches below grade.

Visit EquipmentWorld.com/info

INTERNAL WHEEL

The Morbark 3800XL Wood Hog grinder has a laser-cut, factory-balanced rotor and an internal drive top-feed wheel.

• Features a 40 by 59 3/4-inch infeed opening

• Available with horsepower ranging from 700 to 800 horsepower

• Includes a rugged WHD 120 chain in the infeed bed.

Visit EquipmentWorld.com/info

RELIEF VALVE

Reclaim and deforest particularly steep areas such as river and canal banks, power lines, pipelines, railroads and right of ways with FAE’s UMM/EX forestry mulcher.

• Weighs between 18 and 30 tons

• Uses a 63-cc hydraulic piston motor with a double relief valve

• Has a fixed-teeth rotor for excavators.

Visit EquipmentWorld.com/info

SHEAR BAR

Loftness’s mulcher cuts down standing trees by backing into the work or by hooking to a tractor equipped with a front three-point hitch and power takeoff.

• Has an optional shear bar to produce finer mulch and prevent jamming

• Features an optional hydraulically operated rear mulching door and tree-pusher bar

• Hammers are individually bolted on.

Visit EquipmentWorld.com/info

HIGH FLOW

The Ryan’s Equipment Predator stump grinder handles land clearing and storm clean up with a cutting width of 60 inches and depth of 24 inches.

• Designed for high-flow skid steers with 30 to 50 gpm

• Curtains can be folded back for transportation

• Features a 22 1/2-inch wheel design that holds 24 teeth.

Visit EquipmentWorld.com/info

SELF-POWERED

The Sneller Machine 275-horsepower shredder is self-powered and has a 60-inch drum with stationary carbide teeth.

• Weighs 8,200 pounds and requires a 25 metric ton or larger excavator

• Teeth shred an average of 4 acres a day

• Remote control shredder from the cab.

Visit EquipmentWorld.com/info

REVERSING FAN

The Rayco RH1754-240 processes materials such as wood chips, lumber scraps, pallets, logging slash and green waste.

• Has a 240-horsepower Cummins 6.7-liter diesel engine

• Discharge conveyor reaches 12 feet high

• Radiator has a removable debris screen and reversing fan.

Visit EquipmentWorld.com/info

COMPACT GRINDER

The DuraTech 5064 horizontal grinder, a compact version of the 9564, is 39 feet 5 inches long and weighs 70,000 pounds.

• Available in a track or trailer model

• Choose from 475, 540 or 630 horsepower with an HPTO 14 wet clutch

• Feed opening is 61 1/3 by 35 inches.

Visit EquipmentWorld.com/info

DUAL SCREENS

Vermeer’s HG6000 horizontal grinder produces 755 horsepower and features a dual-screen system.

• Powered by a Cat C18 Tier 4i/Stage IIIB engine

• Screens are reversible and interchangeable

• Drum hammermill has 10 hammers and 20 cutter blocks

with a 36 1/3-inch cutter tip diameter and 62-inch cutting width.

Visit EquipmentWorld.com/info

PRESSURE GAUGE

The Bobcat Brushcat rotary cutters mulch small branches and saplings up to 3 inches in diameter and cut through thick grass and brush.

• Comes in five models with varying auxiliary hydraulic flow capabilities

• Available in both 60- and 72-inch widths

• Hydraulic pressure gauge on the rotary cutter indicates the operating pressure range of the loader and is visible from the operator’s seat.

Visit EquipmentWorld.com/info

DIESEL, ELECTRIC

The Diamond Z DZH4000 horizontal grinders are available as track, wheel or stationary mounted with either diesel or electric power.

• Ranges from 75,000 to 88,000 pounds, depending on which options are included

• Uses a Cat C18 700- and 765-horsepower engine

• Offered with Tier 2, 3 and 4 interim emission ratings.

Visit EquipmentWorld.com/info

By Amy Materson

SIMPLE-TO-USE SYSTEM

Weld or gouge longer with Miller Electric’s XMT 450 MPa multiprocess welder, which handles pulsed MIG welding with up to .052- and 1/16-inch wires and is rated at 450 amps at 100-percent duty cycle. The XMT 450 MPa has a simplified user interface and controls, including a process selector switch and dual digital meters. The XMT 450 MPa can also be used with 74 MPa Plus and AlumaFeed feeders and the XR-AlumaPro or XR Pistol MIG gun for synergic Pulsed MIG welding. The system automatically adjusts pulse parameters to match the wire feed speed, enabling the welder to work on thick or thin materials without having to change multiple parameters.

Visit EquipmentWorld.com/info

RELIABLE WIRE

Achieve reliable arc starting with the Tri-Mark Matrix wire from Hobart Brothers, which provides uncompromised arc starting and wire feeding consistency. The metal-cored welding wire extends the life of robotic gun liners and eliminates buildup at the drive rolls, reducing downtime. The wire produces a consistent bead shape that provides crack resistance and minimizes silicon island formation. The wire is available on 33-pound spools or a 750-pound X-Pak drum.

Visit EquipmentWorld.com/info

BOOST PRODUCTION

Lincoln Electric’s Outback 145 now features a 9.5-horsepower Kohler Model CH395 OHC gasoline engine, which has a cast iron cylinder liner to ensure long engine life and a low oil level automatic shutdown. The Outback 145 delivers 145 amps of DC output welding for use with up to 1/8-inch stick electrodes on steel, stainless steel, cast iron and hardfacing applications. The unit also accepts the Power MIG 140C or Power MIG 180C compact MIG wire welders without an adapter, enabling high-productivity wire welding.

Visit EquipmentWorld.com/info

CUSTOMIZABLE GUNS

Improve productivity with the Q-Gun line of MIG guns from Bernard, which features customizable options for individual applications. The Q-Guns are available in 150-, 200-, 300-, 400-, 500 and 600-amp models and are rated at 100-percent duty cycle with CO2 gas. Select from a locking trigger, dual pull trigger, dual schedule switch and dual schedule switch with lock, and choose a fixed or rotating aluminum neck. Bernard’s online Configurator ordering system enables Q-Gun configuration 24 hours a day through a step-by-step customization process. The units are standard with Centerfire consumables, but can be ordered with Elliptical or Quik Tip consumables.

Visit EquipmentWorld.com/info

POWERFUL PACKAGE

Experience flexibility with Thermadyne’s Thermal Arc 201 TS portable welder, which is useful for a variety of light industrial applications. The 201 TS delivers 100 amps on standard 115-volt circuits for Stick welding and 150 amps for TIG, and can deliver up to 200 amps maximum output when used on 208- to 230-volt circuits. The unit has reduced amperage draw compared to traditional style power supplies while providing a wider range of welding output on smaller input power circuitry.

Visit EquipmentWorld.com/info

MINIMIZE INVENTORY

Reduce the cost of consumables with the Tough Lock Consumables System from Tregaskiss, useful for both semi-automatic and robotic MIG guns. The Tough Lock system features precision machined contact tips and a dual lead thread design that enables the tips to rotate 180 degrees to create a new wear position for extended tip life. The retaining head has Dual Taper Technology; a second rear taper between the gooseneck and contact tip helps dissipate heat and keeps the tip secure and centered. The system also has Surestart tips to reduce arc start failures.

Visit EquipmentWorld.com/info

MINIMIZE DAMAGE

Michelin Americas Truck Tires’ X Works XDY commercial truck has a robust tread design that offers a 10-percent mileage improvement over the company’s XDY3 tire, and the directional tread improves mud evacuation. The on- and off-road tire features Co-Ex Technology, which combines chip and tear resistant compounds on the top layer with a cool base tread layer. Thick sidewall protection helps eliminate damage.

Sizes available:

• 11R22.5 and 11R24.5

Visit EquipmentWorld.com/info

EDITOR’s PICK

POWER BOOST

Improve productivity with Volvo Construction Equipment’s G900B-Series generation of motor graders, offering a high blade down pressure via optimal machine balance and component distribution. The series includes four models, all of which have new large displacement Tier 4 Interim engines with EGR technology that deliver more power and torque than the models they replace. The standard Volvo HTE840 transmission has eight forward gears/four reverse gears, while the optional HTE1160 transmission has shuttle shift and 11 forward/six reverse gears. Two pinions driven by twin directing acting hydraulic cylinders give the circle turn system high output torque, enabling moldboard rotation at any load. Cabs offer dual steering systems, industry-standard pattern controls with low effort, low stroke levers and an unobstructed line of view to the moldboard, over the front frame and to the sides and rear.

Visit EquipmentWorld.com/info

RUGGED ROCK BUCKETS

Handle severe digging and loading applications with Doosan’s rock buckets, available in 4-, 4.5- and 6-cubic-yard heaped capacities. The 4- and 4.5-cubic-yard buckets measure 128.9 inches wide and 54 inches high and the 6-cubic-yard bucket measures 136.2 inches wide and 68.5 inches high. The buckets have a spade nose design, standard weld-on teeth and pin-on mounting.

Visit EquipmentWorld.com/info

LOW-VOLTAGE LIGHT

Larson Electronics’ low-voltage 7-watt Magnalight work light provides operators a bright source of LED illumination suitable for locations where flammable vapors or gases are present. The EHL-LED-120X12-100 has an inline power transformer that allows a step down from 120-VAC current to 12-VDC for low voltage applications. The Magnalight produces more light than a 100-watt incandescent hand lamp and includes 100 feet of cord to increase mobility. A straight blade plug connects to standard outlets, and the lamp can be used outdoors and in damp areas. Additional features include a durable housing, rubber bumper guard and aluminum swivel hook.

Visit EquipmentWorld.com/info

EASY OPERATION

Weld in the shop or on the jobsite with Lincoln Electric’s Power MIG 180 Dual, which has single phase 60-Hz dual 120- and 208-/230-volt input power capability. The welder handles both MIG and flux-cored gas-shielded or self-shielded processes. Operators can transition between the input voltages by attaching the power cord and twisting the locking nut, with no tools needed. The unit welds up to ½-inch steel with self-shielded flux-cored wire and has a wire feeder speed range of 50 to 500 ipm and 30- to 140-amp output range on 120 volts, or 30 to 180 amps on 208/230 volts. The welder includes a standard MIG gun and has a detachable canvas bag.

Visit EquipmentWorld.com/info

SLICE STUMP ROOTS

Dig deep under roots with CEAttachments’ Edge Stump Removal Bucket for skid steers, which has three 23-Series cast steel teeth. The quick attach tilts so the bucket’s side teeth cut through roots and help lift the stump from the ground. A 1/2-inch laser cut funnel -shaped steel bucket scoops up and carries heavy rocks, and a 1-inch-thick cutting edge digs trenches and excavates ditches. The Edge bucket measures 62.5 inches long by 46 inches wide by 20 inches high.

Visit EquipmentWorld.com/info

TURNKEY KIT

Simultaneously track a range of signals with the Champion Instruments TKO GNSS RTK Base/Rover kit, which has dual integrated UHF and GPRS modems. Using a Maxwell 220-channel GNSS board, the turnkey kit allows simultaneous tracking of GPS L1, L2E, L2C and GLONASS L1 and L2 signals. The kit offers support of the GPS L5 and multiple Galileo signals. The TKO base/rover can fix up to 20 satellites in less than five seconds and can hold a repeatable fix in areas without reliable RTK netVwork coverage. The kit comes with MicroSurvey’s FieldGenius and can handle drops, dirt, water and extreme temperatures.

Visit EquipmentWorld.com/info

FIGHT FATIGUE

Eliminate joints and welds during horizontal directional drilling applications with the 700 and 1000 Series HIWS1 drill pipe from Hunting Trenchless, designed for Vermeer Series II directional drills in the 36,000- and 100,000-pound classes. Using a durable one-piece forged design, the pipe’s double shoulder design handles increased torque while the precision machined threads resist fatigue. Hunting HIWS1 pipe has a large inner diameter for increased fluid flow.

Visit EquipmentWorld.com/info

BOOST CLEARANCE

Save installation time with Parker Chelsea’s 892 Series PTO designed for maintenance trucks, which also offers maximum clearance for the 4700 Series transmission. The Series features six speed ratios, eight output types and six shift options. The PTO also has a Wet Spline System that lubricates the mating PTO and pump shafts to increase component life.

Visit EquipmentWorld.com/info

TRANSPORTABLE FUEL STORAGE

Simplify transporting diesel fuel to remote jobsites with Transcube’s XT line of high capacity diesel fuel tanks, which are transportable while full. The XT line includes the TCT100, with a 2,450-gallon capacity, and the TCT200, with a 5,000-gallon capacity. The tanks have a cylindrical inner tank specially designed for diesel transport, and internal baffles reduce fuel surges during transport or while being move on a jobsite. The tank’s outer wall ensures 110-percent secondary containment. The tanks have four feed and return connections and a fuel pump or auxiliary equipment feed. A 2-inch fill pipe provides quick tank refilling, and a three-point locking system prevents tampering or theft.

Visit EquipmentWorld.com/info

POWERFUL UNIT

Run multiple tools simultaneously with Jenny Products’ electric powered J5A-30P single-stage air compressor, which has a 30-gallon air tank. The compressor has a 5-horsepower electric motor that requires a 230-volt power source. A four-cylinder J pump produces 19.4 cfm at 100 psi or 19 cfm at 125 psi. A directional air shroud and large flywheel keeps the pump’s temperature low. Standard features include a manual tank drain, safety relief valve, stainless steel braided discharge hose and a large canister tank with replaceable filter elements.

Visit EquipmentWorld.com/info

By Lauren Heartsill Dowdle

EXTEND CYLINDERS

Efficiency Production’s high-clearance shores have vertical clearances up to 84 inches, a cylinder extension system and two 8-inch-wide, heavy-duty rails ranging in size from 8- to 16-feet tall.

• For trenches up to 25-feet deep and 15-feet wide

• Includes oversleeves to protect the cylinders

• Has 2-inch diameter hydraulic cylinders.

Visit EquipmentWorld.com/info

TRACKED DESIGN

The Toro TRX-20 walk-behind trencher uses four-cycle Kawasaki twin-cylinder engines with a large oil reservoir.

• Has a standard hydraulic oil cooler

• Features a low-profile tracked design

• Three basic controls operate all traction and trenching functions.

Visit EquipmentWorld.com/info

Tips on Tension

Trenching attachment maintenance is the key to not only extending the life of the tool, but also is critical in boosting performance. What should your daily checklist include?

In addition to checking items such as hoses, teeth and lubrication, make sure you’re checking the digging chain tension, a maintenance need that’s often overlooked. If the tension is incorrect, components such as sprockets, idler bearings and the chain itself will suffer excessive wear. Although styles can vary, the typical maximum sag for the chain is about 1 1/2 inches. Put the trencher attachment in the horizontal position so that you can check the sag of the chain, and then correctly adjust the tension.

 Source: Bradco,

Paladin Construction Group

COMPACT SAW

Little Beaver’s Kwik-Trench earth saw is designed for shallow trenching jobs.

• Compact with a push-forward design.

• Cuts trenches up to 12-inches deep

• Can cut up to 30 inches per minute.

Visit EquipmentWorld.com/info

CHEVRON PATTERN

The Ditch Witch RT115 Quad is fully hydrostatic and uses a three-speed ground drive.

• Features a chevron track pattern

• Undercarriage weighs 1,500 pounds

• Has a standard tilt frame configuration.

Visit EquipmentWorld.com/info

DISCHARGING AUGER

The Bradco 640 has a fixed-length boom with a spring-loaded, self-adjusting idler and full rock guard.

• Designed to fit compact and standard skid-steer loaders

• Uses a rugged 50,000-pound, anti-back-flex chain

• Features a discharging auger.

Visit EquipmentWorld.com/info

HYDRAULIC FLOW

Lowe’s XR-Series trenching attachments include a 50,000-pound digging chain, removable double-flighted spoil auger, self-aligning boom and tapered roller bearings.

• Digs from 2 to 5-feet deep and 4 to 12 inches wide

• Operates on hydraulic flow ranging from 8 to 40 gpm

• Has high operating-pressure capability.

Visit EquipmentWorld.com/info

Fit small areas

Dig a trench 13 inches deep and 2 ½ inches wide at 20 feet per minute with E-Z Trench’s EZ9100 Groundsaw.

• Has a Honda GX200 engine with a wet clutch transmission

• Fits through standard gates and weighs 250 pounds

• Uses replaceable, carbide cutting bits.

Visit EquipmentWorld.com/info

QUAD TRACK

Maximize tractive effort and stability with Vermeer’s RTX750 tractor, which uses the rubber quad-track system.

• Specialized undercarriage system fits either rubber tires or tracks

• Uses a 75-horsepower, Tier 3 Cummins engine

• Features planetary axles.

Visit EquipmentWorld.com/info

RANGE OF POWER

With six available models, the Trench-Tech 2000 TT Series trenchers range from 350 to 1,400 horsepower.

• Powered by Cat engines

• Operating weights from 75,000 to 320,000 pounds

• Cuts up to 78 inches wide and 30 feet deep.

Visit EquipmentWorld.com/info

ZTR TRENCHER

The Barreto TK track trencher has a zero-turn radius and a total ground contact of 460 square inches.

• Features an ergonomic, single-handed control

• Engine options range from 13 to 24 horsepower

• Digs trenches up to 48 inches deep.

Visit EquipmentWorld.com/info

SAFE PRODUCTS

The National Trench Safety’s work-zone safety products include handrails, slide rails, beam and plate systems, ladder access system and the Davit arm system.

• Products meet OSHA’s 29 CFR 1926.501 subpart B

• Handrails attach directly to trench shielding

• Slide rails used in place of driven tight sheeting or build-in-place timber shoring systems.

Visit EquipmentWorld.com/info

TIGHT SPACES

Excavate in confined jobsites that are close to buildings or highways with Griswold Machine and Engineering’s slide rail system.

• Rails and panels are put into place as the excavation proceeds

• Used in a pit configuration or for conventional pipe-laying

• Keeps ground subsidence to a minimum.

Visit EquipmentWorld.com/info

By Lauren Heartsill Dowdle

TRIPLE POWER

The Goodall Power Center 1100 is a 3-in-1 power unit for light- to medium-duty use.

• Provides 170 amps of welding power, 4,000 watts of AC electrical power and 16.3 cubic feet per minute of air power

• Designed for mobile service mechanics

• Can be bolted into the bed of a pickup or service body truck.

Visit EquipmentWorld.com/info

REMOVABLE PANELS

The Chicago Pneumatic CPS 185-DD portable compressor is designed for 500-hour service intervals and features a fully galvanized enclosure with removable side panels.

• Uses a 48-horsepower, three-cylinder Deutz Interim Tier 4 engine

• Curbside control panel has a protective shutdown

• Has 100-psi working pressure.

Visit EquipmentWorld.com/info

Air Compressor Safety Tips

• Follow manufacturer’s recommendations for proper operation and routine maintenance. Despite safety features such as fan and belt guards, only trained technicians should adjust compressor components.

• Do not adjust safety, blow-off or control valves without referring to the operating manual. For example, improper adjustments can cause “air explosions” from the safety valve – startling and perhaps even injuring experienced operators.

• Do not change filters or check fluids while the compressor is running. Spraying fluids such as oil can cause burns or serious injury.

• Check for the correct tire pressure. Improperly inflated tires can affect road handling, damage the tire and make transportation dangerous.

• Check for excessive tread wear on the compressor tires.

• Replace worn or unreadable safety stickers on enclosure.

• Ensure that pressure and temperature gauges are working.

• Carefully inspect mechanical components for rust, wear and proper operation: hinges, tow bars, hitches, safety chains, tires and lug nuts.

– Kaeser Compressors

SIDE MOUNT

Vanair’s Air N Arc 300 power system can be mounted on a side-pack or behind the cab.

• Equipped with a true two-generator system

• Has a 40-cubic-feet per minute rotary screw compressor

• Available in gas and diesel versions.

Visit EquipmentWorld.com/info

ELECTRIC COMPRESSOR

The Doosan Infracore Portable Power HP750e – an electric-powered model of the HP750 – is 100 percent emissions-free.

• Power and cooling systems are controlled by liquid-cooled, variable frequency drive system

• Features heavy-duty, tandem-axle running gear

• Designed for applications that have grid power available or are already using a portable generator.

Visit EquipmentWorld.com/info

BELT DRIVEN

Jenny Products’ G-series single-stage, wheeled-portable compressor series is powered by an 8-horsepower Honda GX series gasoline engine.

• Features a heavy-duty, single-stage cast iron compressor pump

• Engine comes with a recoil or electric start

• Units are belt driven with a large flywheel for start-ups and additional cooling.

Visit EquipmentWorld.com/info

Easy Access

The Sullivan-Palatek D185P3 features side-by-side coolers, heavy-duty lifting eye and stop, turn and tail lights.

• Gull-wing doors provide access for servicing

• Choice of either John Deere or Caterpillar power

• Enclosure is powder-coated galvanneal with stainless fasteners and anodized aluminum hinges.

Visit EquipmentWorld.com/info

STEEL FLOOR

The Kaeser Compressor M57 Mobilair uses a heavy-duty, four-cylinder diesel engine with a cold-start battery.

• Delivers 210 cubic feet per minute at 100 psig

• Has a solid steel floor and panel insulation

• Features a torsion bar suspension system and oversized tires.

Visit EquipmentWorld.com/info

EXTREME TEMPERATURES

VMAC’s Predatair has built-in freeze protection and an over-temp safety switch.

• Supplies air output up to 40 or 60 cubic feet per minute

• Has a dry weight of 150 pounds

• Features a standby mode.

Visit EquipmentWorld.com/info

By Lauren Heartsill

EXTENDABLE DECK

The Fontaine Magnitude 55MX heavy-haul trailer features a 55-ton frame capacity in 16 feet and a modular, extendable design.

• Clear deck length ranges from 29 feet retracted to 50 feet extended

• Includes a built-in tool box

• Has a 20-inch loaded deck height with 6-inch ground clearance.

Visit EquipmentWorld.com/info

EQUAL SUSPENSION

The Kalyn Siebert, a Heil subsidiary, specialized heavy-haul trailer has a 170,000-pound capacity in 14-feet of the main deck.

• Hydraulic tower has 16 inches of travel for ground clearance

• Has a horizontal, four-pine design at the rear of the deck

• Features self-equalizing suspension.

Visit EquipmentWorld.com/info

Manufacturers struggle to meet trailer demands

Trailer manufacturers are seeing a spike in trailer orders, but many are unable to produce enough to meet this demand. During the recession, several trailer companies closed plants, made major layoffs, reduced their capacities to build trailers and sold inventory without replacing it, causing them to fall behind when the market picked up.

There also is a shortage of used trailers, says Jim Ladner, national sales manager, Landoll. Operators have been keeping their trailers longer – during a better economy they may have traded for a new trailer, making their used trailer available to the market – causing the demand to outweigh the supply.

“Trailers are used by many industries, not just construction,” Ladner says. “Many of those industries have stabilized, and that, added together with low field inventories and the aging trailer fleets, makes for better trailer demand.”

The Northeast seems to be seeing the strongest demand for trailers, with business starting to pick up in the mid-Atlantic and Great Lakes area, says Greg Smith, vice president of sales and marketing, Talbert Manufacturing. “The Southeast, Central and West still seem to be lagging, with the exception being natural resource areas such as shale and oil patch markets.”

Felling Trailers added a second shift, in February to decrease lead time and increase their production after they saw a large demand for their products. The company has hired 70 people this year, bringing its total employment to more than 150, a company record.

LOAD UP

Simplify loading with Roose Manufacturing’s RR-335 three-reel, self-load trailer.

• Manual or engine-powered hydraulic pumps raise the reels

• Features a 3,000- to 3,500-pound carrying capacity

• Options include a power rewind attachment and tension brake.

Visit EquipmentWorld.com/info

DOUBLE DUMP

The Clement SideStar2 side dump trailer has hydraulic lines routed through the frame’s cross members.

• Has two-speed suspension

• Overall trailer length is 35 feet 8 inches

• Uses two 5-inch, double-acting dump cylinders with advanced seals and flow divide to cylinders.

Visit EquipmentWorld.com/info

CHANGE ANGLE

The Trail-Eze Trailers TE70XT’s design gives contractors a choice between a standard 15-degree load angle or a 10-degree load angle tail.

• Design is achieved without moving axles

• Handles 70,000 pounds distributed, 50,000 pounds concentrated in 16 feet

• Frame is composed of high-tensile steel.

Visit EquipmentWorld.com/info

DROP DECK

Towmaster’s TC-Series drop-deck trailer has 80,000-psi junior I-beam crossmembers and two taillights per side.

• Has a six-position integrated hitch plate

• Uses a bolt-on parking jack

• Features the Towmaster DD sub frame with one-piece formed tongue.

Visit EquipmentWorld.com/info

LEVEL PLATFORM

Advance Metalworking’s Lift-a-Load elevating platform trailer hydraulically lowers to ground height and rises to dock height while remaining level.

• Available in different styles and sizes

• Two-wheel models feature 3/16-inch, Grade 55 diamond plate flooring and tailgate

• Eliminates the need for slanted ramp boards.

Visit EquipmentWorld.com/info

INVERTED CYLINDER

Jet Company’s side-dump trailer’s trunnion-mounted inverted cylinder design decreases tub acceleration and the sudden tub stop at the end of the cylinder travel.

• Has air ride suspension

• Uses two-speed landing legs

• Features four tub pivots per side.

Visit EquipmentWorld.com/info

FOLD RAMP

Featuring a bi-fold ramp with an 8-degree load angle, the TrailMax TRD-54-PR is designed to haul equipment with low ground clearance requirements and angles.

• Has a 23-foot flat deck and 6-foot beavertail

• Ramp stows away and is powered by a self-contained power unit

• Features a tubular subframe with high tensile perimeter rails and tubular cross members on 12- and 16-inch centers.

Visit EquipmentWorld.com/info

AIR POWER

Felling Trailers’ air tilt deck-over trailer uses air powered from the tow vehicle to tilt the trailer and optional ramps, eliminating the need for hydraulics.

• Air-latch system unlocks the deck with a flip of a switch

• Main beam and cross members constructed of Grade 80 steel

• Deck height is 33 inches loaded.

Visit EquipmentWorld.com/info

PULLOUT OUTRIGGERS

Trail King’s Advantage Plus series hydraulic detachable gooseneck features a five-position gooseneck door adjustment that allows for an 8-inch range of king pin height settings.

• Has heavy-duty pullout front outriggers

• Spring-loaded, stainless steel latches can be turned and locked open

• Covered knuckle trough in the rear deck comes standard.

Visit EquipmentWorld.com/info

CUSTOM LENGTHS

Trailboss’s line of the Paver Special comes in 25-, 35-, 40- and 40-ton low boy and a 20-ton tag-a-long.

• 50-ton low boy is 48 feet long

• Custom bed lengths are available with a 6-foot dove tail and 11-foot hydraulically operated folding ramps

• 20-ton tag-a-long has 2-inch hardwood decking.

Visit EquipmentWorld.com/info

PLASTIC DESIGN

Wink Trailer’s Innovator side dump is made with UHMW plastic, which reduces its weight and eliminates freezing and sticking.

• Features ride well suspension

• Can be ordered to dump on either side or both

• Plastic comes in several colors.

Visit EquipmentWorld.com/info

SPRING-ASSIST RAMPS

Load equipment by driving it up the ramps and onto the rear deck of Transcraft’s beavertail trailer, which eliminates the need for a dock.

• Equipped with beavertail and spring-assist ramps and level deck option

• Spring-assist feature helps with manual ramp folding

• Level deck option enables ramp usage in the folded up position as deck space.

Visit EquipmentWorld.com/info

TILT DECK

The Landoll LT1020 has a 20-foot, 10,000-pound capacity tilt deck and a tilt control system.

• Constructed from 6-inch channel main frame and 4-inch junior I-beam cross members

• Features powder coat paint finish

• Has 6,000-pound Torflex axles and 14-gauge formed fenders.

Visit EquipmentWorld.com/info

OVER-THE-ROAD

The Load King Trailers 604/5 DFP SF hydraulic folding gooseneck trailer is primarily used as an over-the-road transport vehicle.

• Has a 60-ton payload capacity

• Available in 22- to 30-foot deck lengths and widths up to 12 feet

• Includes four, 25,000-pound fixed axles and connections for a fifth axle or a stinger.

Visit EquipmentWorld.com/info

FOUR CYLINDERS

The Talbert Manufacturing 55SA trailer is outfitted with the Equalizer, a nitrogen-assisted dampening system that hydraulically transfers loads in all terrains.

• Has a 108-inch swing radius

• Features a non-ground bearing, hydraulic gooseneck design

• Engineered with four hydraulic cylinders.

Visit EquipmentWorld.com/info